Question:
R(UVWXYZ)
Which FD can be determined from the above FD Set?
R(UVWXYZ)
Which FD can be determined from the above FD Set?
Which FD can be determined from the above FD Set?
Updated On: Feb 8, 2024
Hide Solution
Verified By Collegedunia
Solution and Explanation
The correct answer is :
VW\(\rightarrow\)Y; VW\(\rightarrow\)YZ; WX\(\rightarrow\)YZ
VW\(\rightarrow\)Y; VW\(\rightarrow\)YZ; WX\(\rightarrow\)YZ
Was this answer helpful?
0
0
Questions Asked in GATE AR exam
- Which of the following methods is/are used in traffic survey to measure the Running Speed and Journey Speed?
- GATE AR - 2024
- Traffic survey methods, Traffic flow Analysis
- For the beam shown below, ignoring the self-weight, the maximum hogging moment (in kN·m) generated for the loads indicated is _______ (rounded off to one decimal place).
- GATE AR - 2024
- High Rise and Long Span structures, gravity and lateral load resisting systems
- Let f: R→ R be a function. Note: R denotes the set of real numbers.
\(f(x) = \left\{ \begin{array}{ll} -x, & \text{if } x < -2 \\ ax^2+bx+c, & \text{if }\ x \in[-2,2]\\ x, & \text{if } x>2 \end{array} \right.\)
Which ONE of the following choices gives the values of a, b, c that make the function f continuous and differentiable ?- GATE AR - 2024
- Differential Equations
- Consider the dataset with six datapoints : {(x1, y1), (x2, y2), ..., (x6, y6)}, where x1 = \(\begin{bmatrix} 1 \\ 0 \end{bmatrix}\), x2 = \(\begin{bmatrix} 0 \\ 1 \end{bmatrix}\), x3 = \(\begin{bmatrix} 0 \\ -1 \end{bmatrix}\), x4 = \(\begin{bmatrix} -1 \\ 0 \end{bmatrix}\), x5 = \(\begin{bmatrix} 2\\ 2 \end{bmatrix}\), x6 = \(\begin{bmatrix} -2 \\ -2 \end{bmatrix}\) and the labels are given by y1 = y2 = y5 = 1, and y3 = y4 = y6 = -1 .A hard margin linear support vector machine is trained on the above dataset. Which ONE of the following sets is a possible set of support vectors?
- GATE AR - 2024
- Database Concepts
- A ramp with a slope of 1 : 12 is required for wheelchair access. Intermediate landings of length 1.5 m each have to be provided after every 9 m running length. The running length of a straight ramp including landing, to negotiate a level difference of 900 mm vertical height, in m, is ( rounded off to two decimal places).
- GATE AR - 2024
- Urban renewal and conservation
View More Questions