Question:
Lines are first run around the perimeter of a plot, then details are fixed in relation to established lines. This process in surveying is called:
Lines are first run around the perimeter of a plot, then details are fixed in relation to established lines. This process in surveying is called:
Show Hint
Traverse surveying is useful for defining boundaries before plotting internal details.
Updated On: Feb 27, 2025
- Transverse Survey
- Plane Table Survey
- Theodolite Survey
- Triangulation Survey
Hide Solution
Verified By Collegedunia
The Correct Option is A
Solution and Explanation
Step 1: Understanding Survey Methods
- Traverse Surveying: Establishes perimeter lines first. - Plane Table Surveying: Uses direct plotting. - Theodolite Surveying: Measures angles. - Triangulation Surveying: Uses interconnected triangles.
Step 2: Conclusion
Traverse surveying is the correct method for plotting details from established perimeter lines.
- Traverse Surveying: Establishes perimeter lines first. - Plane Table Surveying: Uses direct plotting. - Theodolite Surveying: Measures angles. - Triangulation Surveying: Uses interconnected triangles.
Step 2: Conclusion
Traverse surveying is the correct method for plotting details from established perimeter lines.
Was this answer helpful?
0
0
Top Questions on Surveying and Levelling
In levelling between two points A and B on the opposite banks of a river, the readings are taken by setting the instrument both at A and B, as shown in the table. If the RL of A is 150.000 m, the RL of B (in m) is ....... (rounded off to 3 decimal places).
- GATE CE - 2025
- Geophysics
- Surveying and Levelling
- The maximum value of the function \( h(x) = -x^3 + 2x^2 \) in the interval \([-1, 1.5]\) is equal to ......... (rounded off to 1 decimal place).
- GATE CE - 2025
- Geophysics
- Surveying and Levelling
- Organic fraction of municipal solid waste (OFMSW) with bulk density of 315 kg/m$^3$ and water content of 30% is mixed with municipal sludge of bulk density 700 kg/m$^3$ and water content of 70%, such that the water content of the mixture is 40%. The amount (in kg) of sludge to be mixed per kg of OFMSW (rounded off to 2 decimal places) and the density of the mixture (in kg/m$^3$) (rounded off to the nearest integer) are calculated. Which of the following options is/are true:
- GATE CE - 2025
- Geophysics
- Surveying and Levelling
- If the horizontal distance between a staff point and the point of observation is \( d \), the error due to the curvature of the earth is proportional to
- GATE CE - 2025
- Geophysics
- Surveying and Levelling
- If the Fore Bearing of the lines AB and BC are 60° and 122°, respectively, then the interior angle \( \angle ABC \) (in degrees) is .......... (round off to the nearest integer).
- GATE CE - 2025
- Geophysics
- Surveying and Levelling
View More Questions
Questions Asked in TANCET exam
- A train moving at 108 km/hr crosses a platform in 30 seconds. Then it crosses a man running at 12 km/hr in the same direction in 9 seconds. What is the length of train and platform in m?
- TANCET - 2024
- Time Speed and Distance
- What letter replaces the question mark?
- The speed of a motor boat in still water is 7km/hr. If the speed of the motor boat against the stream is 5 km/hr, what is the speed of the stream?
- TANCET - 2024
- Time Speed and Distance
A closed-loop system has the characteristic equation given by: $ s^3 + k s^2 + (k+2) s + 3 = 0 $.
For the system to be stable, the value of $ k $ is:- TANCET - 2024
- Microprocessors
A digital filter with impulse response $ h[n] = 2^n u[n] $ will have a transfer function with a region of convergence.
- TANCET - 2024
- Digital Signal Processing
View More Questions