In a region of magnetic induction B =$10^2$ tesla, a circular coil of radius 30 cm and resistance $\pi^2$ ohm is rotated about an axis which is perpendicular to the direction of B and which forms a diameter of the coil. If the coil rotates at 200 rpm the amplitude of the alternating current induced in the coil is
- $4\pi^2$ mA
- 30 mA
- 6 mA
- 200 mA
The Correct Option is C
Solution and Explanation
Given,N= 1 ,B =$10^{-2}$ T,
$A=\pi(0.3)^2 m^2,R=\pi^2$
f = (200/60) and $\omega = 2 \pi(200/60)$
Substituting these values and solving, we get
$I_0=6\times10^{-3}A=6 \, mA$
Top Questions on Resistance
A battery of \( 6 \, \text{V} \) is connected to the circuit as shown below. The current \( I \) drawn from the battery is:
- MHT CET - 2024
- Physics
- Resistance
- Resistance of a wire is \( 8\Omega \). It is drawn in such a way that it experiences a longitudinal strain of \( 400% \). The final resistance of the wire is:
- AP EAMCET - 2024
- Physics
- Resistance
- A resistor of resistance \( R \), inductor of inductive reactance \( 2R \) and a capacitor of capacitive reactance \( X_C \) are connected in series to an A.C. source. If the series LCR circuit is in resonance, then the power factor of the circuit and the value \( X_C \) are respectively:
- AP EAMCET - 2024
- Physics
- Resistance
- A cell of emf 1.2 V and internal resistance 2 \( \Omega \) is connected in parallel to another cell of emf 1.5 V and internal resistance 1 \( \Omega \). If the like poles of the cells are connected together, the emf of the combination of the two cells is:
- AP EAMCET - 2024
- Physics
- Resistance
- Two wires A and B are made up of the same material and have the same mass. Wire A has radius \(2.0 \, \text{mm}\) and wire B has radius \(4.0 \, \text{mm}\). The resistance of wire B is \(2 \, \Omega\). The resistance of wire A is _____ \( \Omega \).
- JEE Main - 2024
- Physics
- Resistance
Questions Asked in NEET exam
- Given below are two statements :
Statement I : In the nephron, the descending limb of loop of Henle is impermeable to water and permeable to electrolytes.
Statement II : The proximal convoluted tubule is lined by simple columnar brush border epithelium and increases the surface area for reabsorption.
In the light of the above statements, choose the correct answer from the option given below :- NEET (UG) - 2024
- Nephrons
Given below are two statements: one is labelled as Assertion A and the other is labelled as Reason R.
Assertion A : The potential (V) at any axial point, at 2 m distance(r) from the centre of the dipole of dipole moment vector\(\vec{P}\) of magnitude, 4 × 10-6 C m, is ± 9 × 103 V.
(Take \(\frac{1}{4\pi\epsilon_0}=9\times10^9\) SI units)
Reason R : \(V=±\frac{2P}{4\pi \epsilon_0r^2}\), where r is the distance of any axial point, situated at 2 m from the centre of the dipole.
In the light of the above statements, choose the correct answer from the options given below :- NEET (UG) - 2024
- Magnetic Field
- \(^{290}_{82}X\stackrel{\alpha}{\rightarrow}Y\stackrel{e^+}{\rightarrow}Z\stackrel{\beta^-}{\rightarrow}P\stackrel{e^-}{\rightarrow}Q\)
In the nuclear emission stated above, the mass number and atomic number of the product Q respectively, are :- NEET (UG) - 2024
- Nuclear physics
- In an ecosystem if the Net Primary Productivity (NPP) of first trophic level is 100x (kcal m-2)yr-1, what would be the GPP (Gross Primary Productivity) of the third trophic level of the same ecosystem?
- NEET (UG) - 2024
- Ecosystems
The output (Y) of the given logic gate is similar to the output of an/a :
- NEET (UG) - 2024
- Digital Electronics and Logic Gates
Concepts Used:
Resistance
Resistance is the measure of opposition applied by any object to the flow of electric current. A resistor is an electronic constituent that is used in the circuit with the purpose of offering that specific amount of resistance.
R=V/I
In this case,
v = Voltage across its ends
I = Current flowing through it
All materials resist current flow to some degree. They fall into one of two broad categories:
- Conductors: Materials that offer very little resistance where electrons can move easily. Examples: silver, copper, gold and aluminum.
- Insulators: Materials that present high resistance and restrict the flow of electrons. Examples: Rubber, paper, glass, wood and plastic.
Resistance measurements are normally taken to indicate the condition of a component or a circuit.
- The higher the resistance, the lower the current flow. If abnormally high, one possible cause (among many) could be damaged conductors due to burning or corrosion. All conductors give off some degree of heat, so overheating is an issue often associated with resistance.
- The lower the resistance, the higher the current flow. Possible causes: insulators damaged by moisture or overheating.