Hydrogen gas will not reduce
- heated cupric oxide
- heated ferric oxide
- heated stannic oxide
- heated aluminium oxide
The Correct Option is D
Solution and Explanation
Top Questions on General Principles and Processes of Isolation of Elements
- In an incompressible liquid flow, mass conservation leads to:
- KEAM - 2024
- Physics
- General Principles and Processes of Isolation of Elements
A parallel plate capacitor with plate area \(A\) and plate separation \(d = 2\) m has a capacitance of \(4\mu F\). The new capacitance of the system if half of the space between them is filled with a dielectric material of dielectric constant \(K = 3\) (as shown in the figure) will be:
- BITSAT - 2024
- Physics
- General Principles and Processes of Isolation of Elements
- An oil drop of radius \(1 \, \mu{m}\) is held stationary under a constant electric field of \(3.65 \times 10^4 \, {N/C}\) due to some excess electrons present on it. If the density of the oil drop is \(1.26 \, {g/cm}^3\), then the number of excess electrons on the oil drop approximately is:
[Take, g = 10 m/s2]- BITSAT - 2024
- Physics
- General Principles and Processes of Isolation of Elements
A gas can be taken from A to B via two different processes ACB and ADB. When path ACB is used, \( 60 J \) of heat flows into the system and \( 30 J \) of work is done by the system. If path ADB is used, the work done by the system is \( 10 J \). The heat flow into the system in path ADB is:
- BITSAT - 2024
- Physics
- General Principles and Processes of Isolation of Elements
- A particle of mass \( 2 \) kg is on a smooth horizontal table and moves in a circular path of radius \( 0.6 \) m. The height of the table from the ground is \( 0.8 \) m. If the angular speed of the particle is \( 12 \) rad/s, the magnitude of its angular momentum about a point on the ground right under the center of the circle is:
- BITSAT - 2024
- Physics
- General Principles and Processes of Isolation of Elements
Questions Asked in JEE Advanced exam
- Re-using waste material is an accepted principle of sustainability. Used tyres are one such waste material. You are required to design and sketch a utility object made of tyres, which could be of different sizes and types (e.g. bicycle, car, two-wheeler tyres, etc.).
- JEE Advanced - 2024
- Imagination and Aesthetic Sensitivity
- Make a pencil sketch of a mug that is commonly used for bathing. The sketch should also show a hand holding the mug. The drawing should be of appropriate form and proportion, showing various parts, materials, and textures, along with shades and shadows.
- JEE Advanced - 2024
- Freehand Drawing
- Sketch an interior view of an examination hall, depicting the scene of an examination in progress.
- JEE Advanced - 2024
- Freehand Drawing
- An impressive entrance gateway has to be designed for a college. Make a pencil drawing of the elevation of the gateway, adding appropriate elements of your choice. Also, add shade, patterns, and textures. Some indicative outlines of part of the gateway, and a line of symmetry, are given below.
- JEE Advanced - 2024
- Freehand Drawing
- Consider the developed surface in Figure K. Lines of cut and fold are indicated. Draw the 3D view of the solid in a manner that the faces A, B, and C are visible.
- JEE Advanced - 2024
- Three-Dimensional Perception
Concepts Used:
General Principles and Processes of Isolation of Elements
What are Ores and Minerals?
Minerals are the naturally occurring, homogeneous inorganic solid substances. They are having a definite chemical composition and crystalline structure, hardness and color. For example, copper pyrite, calamine, etc.
Impurities in an ore are called gauge. The removal of a gauge from the ore is called concentration ore.
Several steps are involved in the extraction of pure metal from ores. Major steps are as follows –
- Concentration of the ore
- Isolation of the metal from its concentrated ore
- Purification of the metal