Question:
Freon used as refrigerant is
Freon used as refrigerant is
Updated On: Aug 15, 2022
- $ C{{F}_{2}}=C{{F}_{2}} $
- $ C{{H}_{2}}{{F}_{2}} $
- $ CC{{l}_{2}}{{F}_{2}} $
- $ C{{F}_{4}} $
Hide Solution
Verified By Collegedunia
The Correct Option is C
Solution and Explanation
Freon is $ \text{CC}{{\text{l}}_{\text{2}}}{{\text{F}}_{\text{2}}}\text{.} $ It is used as refrigerant.
Was this answer helpful?
0
0
Top Questions on Polymers
- Which among the following is a biodegradable polymer?
- For polymers, match each process with the most suitable application listed.
Process Application P Extrusion 1 Producing complex parts with close tolerance Q Injection molding 2 Producing thermosetting plastic components R Blow molding 3 Producing long uniform sections S Compression molding 4 Producing hollow shapes - Caprolactam when heated at high temperature in presence of water, gives
- Match List -I with List-IIChoose the correct answer from the options given below:
List -I List-II A Buna-S I Vinyl chloride B Neoprene II 1,3-Butadiene and styrene C PVC III Tetra flouroethene D Teflon IV Chloroprene - Which of the following is a homopolymer?
View More Questions
Questions Asked in JCECE exam
- In the figure, the ball P is released from rest, when the spring is at its natural length. For the block Q of mass $ 2{{m}_{0}} $ to leave contact with ground at some stage, the minimum mass of P must be
- JCECE - 2015
- Conservation of energy
- A $ 50\,\Omega $ galvanometer is shunted by a resistance of $ 5\,\Omega . $ The percentage of the total current, which passes through the galvanometer is
- JCECE - 2015
- Current electricity
- The effective resistance across the points P and Q is
- JCECE - 2015
- Current electricity
- A disc of radius a and mass m is pivoted at the rim and is set in small oscillation. If a simple pendulum have the same period as that of the disc, then the length of the simple pendulum should be
- JCECE - 2015
- Oscillations
- An elliptically shaped ring of dimensions shown in figure just touches, the horizontal surface of a liquid of surface tension S. The force required to pull the ring away from the liquid surface is
- JCECE - 2015
- Surface tension
View More Questions