Question:
For a geared engine winding system, the man winding cage is placed at its normal position at pit top of the shaft. As per CMR 2017, the minimum space, in m, between the center of the hole of the detaching hook attached to the rope shackle and detaching belt plate is
For a geared engine winding system, the man winding cage is placed at its normal position at pit top of the shaft. As per CMR 2017, the minimum space, in m, between the center of the hole of the detaching hook attached to the rope shackle and detaching belt plate is
Updated On: Jul 18, 2024
- 3.6
- 2.4
- 1.8
- 1.5
Hide Solution
Verified By Collegedunia
The Correct Option is C
Solution and Explanation
The correct option is (C): 1.8
Was this answer helpful?
0
0
Questions Asked in GATE MN exam
- A Bord and Pillar panel is developed at a depth of 250 m in a flat coal seam. The vertical stress gradient is 0.027 MPa/m. If the strength of a square pillar is 12.5 MPa, the extraction ratio of the pillar for a safety factor of 1.5, is____.(round off up to 2 decimals)
- GATE MN - 2024
- Room and pillar mining
- Water is pumped from a mine sump at the rate of 300 m3/hr to an inverted conical water tank, as shown. The rate of rise in water level in m/min, at the instant water level reaches at 5 m height from bottom of the tank, is____.(round off up to 2 decimals)
- GATE MN - 2024
- Levels and Levelling
- A mine worker weighing (W) 600 N lifts an object of 100 N as shown. The 50% body weight is applied downward through point A and a force FE is produced parallel to x axis by the contraction of erector spinae muscle during lifting. The lumber disc, L (shown by red box) acts as a smooth hinge and keeps the upper body in static equilibrium. Ignore all other forces in the body. The magnitude of the resultant of the reaction forces, in N at the lumber disc, is____.(round off up to 2 decimals)
- GATE MN - 2024
- Mechanization of Surface Mining
- In an opencast coal mine, blast vibrations are measured at two locations, A and B simultaneously for a maximum charge per delay (Q) of 1200 kg as given.\(PPV=K[\frac{D}{\sqrt{Q}}]^{-B}\)
Location Distance from the blast face, D (m) PPV (mm/s) A 100 112.5 B 300 20.3
where, K and ẞ are site constants. The PPV in mm/s, at a distance of 200 m from the blast face, is (round off up to 2 decimals)- GATE MN - 2024
- Ground Vibrations
- A solid ball of mass 10 kg is subjected to forces as shown. The magnitude of the acceleration in m/s2, is____.(round off up to 2 decimals)
- GATE MN - 2024
- Optimization of Facility Location
View More Questions