Question:
Digital circuits can be made with the repetitive use of
Digital circuits can be made with the repetitive use of
Updated On: Jul 28, 2022
- OR gates
- AND gates
- NOT gates
- NAND gates
Hide Solution
Verified By Collegedunia
The Correct Option is D
Solution and Explanation
NAND gate is a universal gate and all other logic circuits can be created using different combinations of NAND gates.
Was this answer helpful?
0
0
Top Questions on Semiconductor electronics: materials, devices and simple circuits
The I-V characteristics shown above are exhibited by a:- NEET (UG) - 2024
- Physics
- Semiconductor electronics: materials, devices and simple circuits
- Conductivity of a photodiode starts changing only if the wavelength of incident light is less than 660 nm. The band gap of the photodiode is found to be \[\frac{X}{8} \, \text{eV}.\]The value of $X$ is:\text{(Given, $h = 6.6 \times 10^{-34} \, \text{Js}$, $e = 1.6 \times 10^{-19} \, \text{C}$)}
- JEE Main - 2024
- Physics
- Semiconductor electronics: materials, devices and simple circuits
- To measure the temperature coefficient of resistivity $\alpha$ of a semiconductor, an electrical arrangement shown in the figure is prepared. The arm BC is made up of the semiconductor. The experiment is being conducted at $25^\circ \text{C}$ and the resistance of the semiconductor arm is $3 \, \text{m}\Omega$. Arm BC is cooled at a constant rate of $2^\circ \text{C/s}$. If the galvanometer G shows no deflection after 10 s, then $\alpha$ is:
- JEE Main - 2024
- Physics
- Semiconductor electronics: materials, devices and simple circuits
- The acceptor level of a p-type semiconductor is 6eV. The maximum wavelength of light which can create a hole would be : Given hc = 1242 eV nm.
- JEE Main - 2024
- Physics
- Semiconductor electronics: materials, devices and simple circuits
- Which of the diode circuit shows correct biasing used for the measurement of dynamic resistance of p-n junction diode :
- JEE Main - 2024
- Physics
- Semiconductor electronics: materials, devices and simple circuits
View More Questions
Questions Asked in NTA Abhyas exam
- Which of the following can show positive deviation from Raoult's law?
- NTA Abhyas - 2020
- Solutions
- A particle of mass $m$ and charge $q$ is thrown from a point in space where uniform gravitational field & electric field are present. The particle (1) may follow a straight line (2) may follow a circular path (3) may follow a parabolic path
- NTA Abhyas - 2020
- electrostatic potential and capacitance
- When two bodies collide elastically. The force of interaction between them is
- NTA Abhyas - 2020
- Elastic and inelastic collisions
- The dimensional formula for entropy is
- NTA Abhyas - 2020
- Dimensional Analysis
- The dimensional formula for permittivity of free space $\left(\left(\epsilon \right)_{0}\right)$ in the equation $F=\frac{1}{4 \pi \epsilon _{0}}\frac{q_{1} q_{2}}{r^{2}}$ , where symbols have their usual meaning, is
- NTA Abhyas - 2020
- Dimensional Analysis
View More Questions
Concepts Used:
Semiconductors
Semiconductors are a crystalline solid materials, whose electrical conductivity lies between a conductor and an insulator. Semiconductors are mainly used in the manufacturing of electronic devices like capacitors, transistors, diodes, Integrated circuits, etc.
Properties of Semiconductor:
- Semiconductor acts like an insulator at Zero Kelvin. On increasing the temperature, it works as a conductor.
- Due to their exceptional electrical properties, semiconductors can be modified by doping to make semiconductor devices suitable for energy conversion, switches, and amplifiers.
- Lesser power losses.
Uses of Semiconductor:
- Semiconductors are widely used in manufacturing electronics devices like transistors, diodes, sensors, integrated circuits.
- Semiconductors are widely used in all electronic devices, like mobile phones, digital cameras, communication devices, trains, ATMs, etc.