An object of mass 5 kg is thrown vertically upwards from the ground. The air resistance produces a constant retarding force of 10 N throughout the motion. The ratio of time of ascent to the time of descent will be equal to [Use \(g\) = \(10 \;ms^{–2}\)].
- 1 : 1
- \(\sqrt2 : \sqrt3\)
- \(\sqrt3 : \sqrt2\)
- 2 : 3
The Correct Option is B
Solution and Explanation
Let time taken to ascent is \(t_1\) and that to descent is \(t_2\). Height will be same so
\(H = \frac{1}{2} \times 12t^2_1=\frac{1}{2} \times 8t^2_2\)
⇒ \(\frac{t_1}{t_2} = \frac{\sqrt{2}}{\sqrt{3}}\)
Top Questions on Resistance
- The effective resistance between points A and B in the given circuit is:
A wire of resistance $ R $ is bent into a triangular pyramid as shown in the figure, with each segment having the same length. The resistance between points $ A $ and $ B $ is $ \frac{R}{n} $. The value of $ n $ is:
- JEE Main - 2025
- Physics
- Resistance
- A wire of resistance \( X \, \Omega \) is gradually stretched till its length becomes twice its original length. If its new resistance becomes 40 \( \Omega \), find the value of \( X \).
- A wire of resistance \( R \), connected to an ideal battery, consumes a power \( P \). If the wire is gradually stretched to double its initial length, and connected across the same battery, the power consumed will be:
- Find the effective resistance of the network of resistors between points A and F as shown in the figure.
Questions Asked in JEE Main exam
- If the coefficient of \( x \) in the expansion of \[ (ax^2 + bx + c)(1 - 2x)^{26} \] is \(-56\) and the coefficients of \( x^2 \) and \( x^3 \) are both zero, then \( a + b + c \) is equal to
- JEE Main - 2026
- Binomial theorem
The equivalent resistance between the points \(A\) and \(B\) in the given circuit is \[ \frac{x}{5}\,\Omega. \] Find the value of \(x\).
- JEE Main - 2026
- Current electricity
Method used for separation of mixture of products (B and C) obtained in the following reaction is:
- JEE Main - 2026
- p -Block Elements
- Consider light travelling from a medium A to medium B separated by a plane interface. If the light undergoes total internal reflection during its travel from medium A to B and the speed of light in media A and B are \(2.4 \times 10^8\) m/s and \(2.7 \times 10^8\) m/s, respectively, then the value of critical angle is :
- JEE Main - 2026
- Newtons Laws of Motion
In the following \(p\text{–}V\) diagram, the equation of state along the curved path is given by \[ (V-2)^2 = 4ap, \] where \(a\) is a constant. The total work done in the closed path is:
- JEE Main - 2026
- Thermodynamics
Concepts Used:
Resistance
Resistance is the measure of opposition applied by any object to the flow of electric current. A resistor is an electronic constituent that is used in the circuit with the purpose of offering that specific amount of resistance.
R=V/I
In this case,
v = Voltage across its ends
I = Current flowing through it
All materials resist current flow to some degree. They fall into one of two broad categories:
- Conductors: Materials that offer very little resistance where electrons can move easily. Examples: silver, copper, gold and aluminum.
- Insulators: Materials that present high resistance and restrict the flow of electrons. Examples: Rubber, paper, glass, wood and plastic.
Resistance measurements are normally taken to indicate the condition of a component or a circuit.
- The higher the resistance, the lower the current flow. If abnormally high, one possible cause (among many) could be damaged conductors due to burning or corrosion. All conductors give off some degree of heat, so overheating is an issue often associated with resistance.
- The lower the resistance, the higher the current flow. Possible causes: insulators damaged by moisture or overheating.