An npn transistor with current gain \(β = 100\) in common emitter configuration is shown in the figure. The output voltage of the amplifier will be
- 0.1 V
- 1.0 V
- 10 V
- 100 V
The Correct Option is B
Solution and Explanation
Top Questions on Semiconductor electronics: materials, devices and simple circuits
The graph shows the variation of current with voltage for a p-n junction diode. Estimate the dynamic resistance of the diode at \( V = -0.6 \) V.
- CBSE CLASS XII - 2025
- Physics
- Semiconductor electronics: materials, devices and simple circuits
- A p-n junction is forward biased. Describe the movement of the charge carriers which produce current in it.
- CBSE CLASS XII - 2025
- Physics
- Semiconductor electronics: materials, devices and simple circuits
- The threshold voltage of a silicon diode is 0.7 V. It is operated at this point by connecting the diode in series with a battery of \( V \) volt and a resistor of 1000 \( \Omega \). Find the value of \( V \) when the current drawn is 15 mA.
- CBSE CLASS XII - 2025
- Physics
- Semiconductor electronics: materials, devices and simple circuits
Assertion : In a semiconductor diode, the thickness of the depletion layer is not fixed.
Reason (R): Thickness of depletion layer in a semiconductor device depends upon many factors such as biasing of the semiconductor.
- CBSE CLASS XII - 2025
- Physics
- Semiconductor electronics: materials, devices and simple circuits
- When the resistance measured between p and n ends of a p-n junction diode is high, it can act as a/an:
- CBSE CLASS XII - 2025
- Physics
- Semiconductor electronics: materials, devices and simple circuits
Questions Asked in JEE Main exam
Let \[ I(x) = \int \frac{dx}{(x-11)^{\frac{11}{13}} (x+15)^{\frac{15}{13}}} \] If \[ I(37) - I(24) = \frac{1}{4} \left( b^{\frac{1}{13}} - c^{\frac{1}{13}} \right) \] where \( b, c \in \mathbb{N} \), then \[ 3(b + c) \] is equal to:
- JEE Main - 2025
- Integration
- Given below are two statements: Statement I: One mole of propyne reacts with excess of sodium to liberate half a mole of H₂ gas. Statement II: Four g of propyne reacts with NaNH₂ to liberate NH₃ gas which occupies 224 mL at STP. In the light of the above statements, choose the most appropriate answer from the options given below:
- JEE Main - 2025
- Organic Chemistry
- Given below are two statements about X-ray spectra of elements:
Statement (I):A plot of \(\sqrt {v}\) (v=frequency of X-rays emitted) vs atomic mass is a straight line.
Statement (II): A plot of v (v=frequency of X-rays emitted)} vs atomic number is a straight line.- JEE Main - 2025
- X-ray Spectra and Moseley's Law
For the thermal decomposition of \( N_2O_5(g) \) at constant volume, the following table can be formed, for the reaction mentioned below: \[ 2 N_2O_5(g) \rightarrow 2 N_2O_4(g) + O_2(g) \] Given: Rate constant for the reaction is \( 4.606 \times 10^{-2} \text{ s}^{-1} \).
- JEE Main - 2025
- Organic Chemistry
- The ratio of the power of a light source \( S_1 \) to that of the light source \( S_2 \) is 2. \( S_1 \) is emitting \( 2 \times 10^{15} \) photons per second at 600 nm. If the wavelength of the source \( S_2 \) is 300 nm, then the number of photons per second emitted by \( S_2 \) is \_\_\_\_\_ \( \times 10^{14} \).
- JEE Main - 2025
- Units and measurement
Concepts Used:
Semiconductors
Semiconductors are a crystalline solid materials, whose electrical conductivity lies between a conductor and an insulator. Semiconductors are mainly used in the manufacturing of electronic devices like capacitors, transistors, diodes, Integrated circuits, etc.
Properties of Semiconductor:
- Semiconductor acts like an insulator at Zero Kelvin. On increasing the temperature, it works as a conductor.
- Due to their exceptional electrical properties, semiconductors can be modified by doping to make semiconductor devices suitable for energy conversion, switches, and amplifiers.
- Lesser power losses.
Uses of Semiconductor:
- Semiconductors are widely used in manufacturing electronics devices like transistors, diodes, sensors, integrated circuits.
- Semiconductors are widely used in all electronic devices, like mobile phones, digital cameras, communication devices, trains, ATMs, etc.