An LCR series circuit, connected to a source $E$, is at resonance. Then
- the voltage across R is zero
- the voltage across R equals applied voltage
- the voltage across C is zero
- the voltage across L equals applied voltage
The Correct Option is B
Solution and Explanation
At resonance (series fircuit)
$V_{L}=V_{C} \Rightarrow E=V_{R}$
ie, whole applied voltage appeared across the resistance.
Top Questions on Alternating current
- An alternating current at any instant is given by \[ i = \left[ 6 + \sqrt{56} \sin\left(100 \pi t + \frac{\pi}{3}\right) \right] \, \text{A}.\] The RMS value of the current is ______ A.
- JEE Main - 2024
- Physics
- Alternating current
- In an ac circuit, the instantaneous current is zero,when the instantaneous voltage is maximum. In this case, the source may be connected to :
A. pure inductor.
B. pure capacitor.
C. pure resistor.
D. combination of an inductor and capacitor.
Choose the correct answer from the options given below :- JEE Main - 2024
- Physics
- Alternating current
- An alternating emf \( E = 110\sqrt{2} \sin 100t \, \text{volt} \) is applied to a capacitor of \( 2\mu\text{F} \), the rms value of current in the circuit is \(\dots\) \(\text{mA}\).
- JEE Main - 2024
- Physics
- Alternating current
- A coil of negligible resistance is connected in series with \(90 \, \Omega\) resistor across \(120 \, \text{V}, \, 60 \, \text{Hz}\) supply. A voltmeter reads \(36 \, \text{V}\) across resistance. Inductance of the coil is:
- JEE Main - 2024
- Physics
- Alternating current
- When a coil is connected across a 20 V dc supply, it draws a current of 5 A. When it is connected across 20 V, 50 Hz ac supply, it draws a current of 4 A. The self inductance of the coil is ______ mH.
(Take \(\pi\) = 3)- JEE Main - 2024
- Physics
- Alternating current
Questions Asked in BCECE exam
- Instantaneous displacement current of 1.0A in the space between the parallel plates of 1μF capacitor can be established by changing the potential difference of:
- BCECE - 2023
- Electromagnetic waves
- In the displacement method of \(l_1\) and \(l_1\) be the sizes of two images, then the size of the object is:
- BCECE - 2023
- Ray optics and optical instruments
- A beaker is a field with water (μ=\(\frac{4}{3}\)) up to a height of 33.25cm. A concave mirror is placed 15 cm above the water level and the image of an object placed at the bottom is formed 25cm below the water level. The focal length of the mirror is nearly :
- BCECE - 2023
- Ray optics and optical instruments
- An air doubble is inside water (μ=\(\frac{4}{3}\)). At what distance from the air bubble should a point object be placed so as to form a real image at the same distance from the dubble? (r is the radius of curvature of the bubble)
- BCECE - 2023
- Ray optics and optical instruments
If the length of a filament of a heater is reduced by 10% , the power of the heater will:
- BCECE - 2022
- Refraction of Light
Concepts Used:
Alternating Current
An alternating current can be defined as a current that changes its magnitude and polarity at regular intervals of time. It can also be defined as an electrical current that repeatedly changes or reverses its direction opposite to that of Direct Current or DC which always flows in a single direction as shown below.
Alternating Current Production
Alternating current can be produced or generated by using devices that are known as alternators. However, alternating current can also be produced by different methods where many circuits are used. One of the most common or simple ways of generating AC is by using a basic single coil AC generator which consists of two-pole magnets and a single loop of wire having a rectangular shape.
Application of Alternating Current
AC is the form of current that are mostly used in different appliances. Some of the examples of alternating current include audio signal, radio signal, etc. An alternating current has a wide advantage over DC as AC is able to transmit power over large distances without great loss of energy.