Question:
An arbitrary scale used in sugar industry is
An arbitrary scale used in sugar industry is
Show Hint
°Brix is a commonly used scale in the sugar industry to determine the concentration of sucrose in water. It's a key parameter for sugar processing.
Updated On: June 02, 2025
- °API
- ° Baume
- ° Brix
- ° Twaddle
Hide Solution
Verified By Collegedunia
The Correct Option is C
Solution and Explanation
- °Brix is an arbitrary scale used in the sugar industry to measure the concentration of sucrose in an aqueous solution.
- °Baume is used for measuring the density of liquids.
- °API is used in the oil industry to measure the density of petroleum liquids.
- °Twaddle is a scale used for measuring the density of liquids, primarily in the chemical industry.
Conclusion:
The correct answer is °Brix, which is used in the sugar industry to measure the concentration of sugar.
Was this answer helpful?
0
0
Top Questions on Surface Chemistry
- The critical micelle concentration (CMC) of a soap solution is \( 5 \times 10^{-4} \, \text{mol L}^{-1} \). Identify the correct statements about this solution.
[I.] The micelle is stable if the soap solution concentration is \( 10^{-7} \, \text{mol L}^{-1} \)
[II.] The micelle is stable if the soap solution concentration is higher than \( 5 \times 10^{-4} \, \text{mol L}^{-1} \)
[III.] Micelles are also known as associated colloids.- AP EAPCET - 2025
- Chemistry
- Surface Chemistry
- Match the following:
List-I (Sol) List-II (Method of preparation) A) \( \text{As}_2\text{S}_3 \) I) Bredig's arc method B) \( \text{Au} \) II) Oxidation C) \( \text{S} \) III) Hydrolysis D) \( \text{Fe(OH)}_3 \) IV) Double decomposition - AP EAPCET - 2025
- Chemistry
- Surface Chemistry
- The adsorption of a gas on a solid surface follows Freundlich adsorption isotherm. At \( T \)(K), the gas pressure is \( 2 \) atm. What is the value of \( \frac{x}{m} \)? (\( n = 2 \) and \( k \) = constant)
- AP EAPCET - 2025
- Chemistry
- Surface Chemistry
- In a colloidal solution, both the dispersed phase and dispersion medium are in liquid phase. What is the type of colloid?
- AP EAPCET - 2025
- Chemistry
- Surface Chemistry
- The adsorption of a gas on a solid surface follows Freundlich adsorption isotherm. At \( T \)(K), the gas pressure is \( 2 \) atm. What is the value of \( \frac{x}{m} \)? (\( n = 2 \) and \( k \) = constant)
- AP EAPCET - 2025
- Chemistry
- Surface Chemistry
View More Questions
Questions Asked in TANCET exam
- What letter replaces the question mark?
- An intermediate shaft of a gearbox, supporting two spur gears A and B and mounted between two bearings C1 and C2, is shown in the below figure. The pitch circle diameters of gears A and B are 500 and 250 mm respectively. The shaft is made of alloy steel 20MnCr5. (\( S_{ut} = 620 \) and \( S_{yt} = 480 \) N/mm\(^2\)). The factors \( k_b \) and \( k_t \) of the ASME code are 2 and 1.5 respectively. The gears are keyed to the shaft. Determine the shaft diameter using the ASME code.
- TANCET - 2024
- Machine Design
- A train moving at 108 km/hr crosses a platform in 30 seconds. Then it crosses a man running at 12 km/hr in the same direction in 9 seconds. What is the length of train and platform in m?
- TANCET - 2024
- Time, Speed and Distance
- The speed of a motor boat in still water is 7km/hr. If the speed of the motor boat against the stream is 5 km/hr, what is the speed of the stream?
- TANCET - 2024
- Time, Speed and Distance
A closed-loop system has the characteristic equation given by: $ s^3 + k s^2 + (k+2) s + 3 = 0 $.
For the system to be stable, the value of $ k $ is:- TANCET - 2024
- Microprocessors
View More Questions
