A wire of length L, area of cross section A is hanging from a fixed support. The length of the wire changes to \(L_1\) when mass M is suspended from its free end. The expression for Young’s modulus is:
- $\frac {MgL_1}{AL}$
- $\frac {Mg(L_1-L)}{AL}$
- $\frac {MgL}{AL_1}$
- $\frac {MgL}{A(L_1-L)}$
The Correct Option is D
Solution and Explanation
Answer is option (D): \(\frac {MgL}{A(L_1-L)}\)
Top Questions on Stress and Strain
- For smaller deformations, stress is directly proportional to the strain for any material. Then the constant of proportionality is called as its
- KEAM - 2025
- Physics
- Stress and Strain
- One end of a steel wire is fixed to the ceiling of an elevator moving up with an acceleration \( 2 \, \text{m/s}^2 \) and a load of 10 kg hangs from the other end. If the cross-section of the wire is \( 2 \, \text{cm}^2 \), then the longitudinal strain in the wire will be (Take \( g = 10 \, \text{m/s}^2 \) and \( Y = 2.0 \times 10^{11} \, \text{N/m}^2 \)).
- WBJEE - 2025
- Physics
- Stress and Strain
- Young's modulus and shear modulus are applicable for:
- KEAM - 2025
- Physics
- Stress and Strain
- The total energy of a satellite in a circular orbit at a distance \( (R + h) \) from the center of the Earth varies as
- KCET - 2025
- Physics
- Stress and Strain
- A body of weight \( W \) is suspended from the ceiling of a room through a chain of weight \( w \). The ceiling pulls the chain by a force.
- KEAM - 2024
- Physics
- Stress and Strain
Questions Asked in NEET exam
- A container has two chambers of volumes \(V_1 = 2\) litres and \(V_2 = 3\) litres separated by a partition made of a thermal insulator. The chambers contain \(n_1 = 2\) moles and \(n_2 = 3\) moles of ideal gas at pressures \(p_1 = 1\) atm and \(p_2 = 2\) atm, respectively. When the partition is removed, the mixture attains an equilibrium pressure of :
- NEET (UG) - 2025
- Ideal Gases
A sphere of radius R is cut from a larger solid sphere of radius 2R as shown in the figure. The ratio of the moment of inertia of the smaller sphere to that of the rest part of the sphere about the Y-axis is :
- NEET (UG) - 2025
- Moment Of Inertia
The current passing through the battery in the given circuit, is:
- NEET (UG) - 2025
- Current electricity
A bob of heavy mass \(m\) is suspended by a light string of length \(l\). The bob is given a horizontal velocity \(v_0\) as shown in figure. If the string gets slack at some point P making an angle \( \theta \) from the horizontal, the ratio of the speed \(v\) of the bob at point P to its initial speed \(v_0\) is :
- NEET (UG) - 2025
- Pendulums
- Two cities X and Y are connected by a regular bus service with a bus leaving in either direction every T min. A girl is driving scooty with a speed of 60 km/h in the direction X to Y. She notices that a bus goes past her every 30 minutes in the direction of her motion, and every 10 minutes in the opposite direction. Choose the correct option for the period T of the bus service and the speed (assumed constant) of the buses.
- NEET (UG) - 2025
- Relative Velocity
Concepts Used:
Stress and Strain
Stress and Strain are the terms in physics, which are used to explain deformation of solids.
What is Stress?
Force applied per unit area is known as stress.
- σ=F/A
- σ is stress applied
- F is force applied
- A is that the area of force applied
- Stress is measured by unit N/m2
What is Strain?
As a result of stress, change of shape is observed in the body. The change or deformity consequential to the stress acting on the body is called strain. Strain can be defined as the amount or measure of deformity that takes place due to the force applied on the object.
Strain is denoted with (ε). It has no units.
Longitudinal Strain = Δ L/L
Relation Between Stress and Strain
The English scientist Robert Hooke, while studying spring and elasticity, noticed that many materials displayed an identical property when the stress-strain relationship was studied. There exists a linear region where the force required to stretch the material was proportional to the extension of the material; this is called Hooke’s law. Mathematically, the law is presented as:
F = -k.x
Where, F = the force
x = the extension length
k = spring constant in N/m