A transistor connected at common emitter mode contains load resistance of 5 k$\Omega$ and an input resistance of 1 k$\Omega$. If the input peak voltage is 5 mV and the current gain is 50, find the voltage gain.
- 250
- 500
- 125
- 50
The Correct Option is A
Solution and Explanation
Top Questions on Semiconductor electronics: materials, devices and simple circuits
The I-V characteristics shown above are exhibited by a:- NEET (UG) - 2024
- Physics
- Semiconductor electronics: materials, devices and simple circuits
- Conductivity of a photodiode starts changing only if the wavelength of incident light is less than 660 nm. The band gap of the photodiode is found to be \[\frac{X}{8} \, \text{eV}.\]The value of $X$ is:\text{(Given, $h = 6.6 \times 10^{-34} \, \text{Js}$, $e = 1.6 \times 10^{-19} \, \text{C}$)}
- JEE Main - 2024
- Physics
- Semiconductor electronics: materials, devices and simple circuits
- To measure the temperature coefficient of resistivity $\alpha$ of a semiconductor, an electrical arrangement shown in the figure is prepared. The arm BC is made up of the semiconductor. The experiment is being conducted at $25^\circ \text{C}$ and the resistance of the semiconductor arm is $3 \, \text{m}\Omega$. Arm BC is cooled at a constant rate of $2^\circ \text{C/s}$. If the galvanometer G shows no deflection after 10 s, then $\alpha$ is:
- JEE Main - 2024
- Physics
- Semiconductor electronics: materials, devices and simple circuits
- The acceptor level of a p-type semiconductor is 6eV. The maximum wavelength of light which can create a hole would be : Given hc = 1242 eV nm.
- JEE Main - 2024
- Physics
- Semiconductor electronics: materials, devices and simple circuits
- Which of the diode circuit shows correct biasing used for the measurement of dynamic resistance of p-n junction diode :
- JEE Main - 2024
- Physics
- Semiconductor electronics: materials, devices and simple circuits
Questions Asked in AIIMS exam
Given below are two statements, one is labelled as Assertion A and the other is labelled as Reason R
Assertion (A) : 02 is liberated in the non-cyclic photophosphorylation.
Reason (R) : Liberation of oxygen is due to photolysis of water.
In the light of the above statements, choose the correct answer from the options given below
- AIIMS - 2019
- Photosynthesis in higher plants
- Match the following column I with column II.
- AIIMS - 2019
- cloning
Given below are two statements, one is labelled as Assertion A and the other is labelled as Reason R
Assertion (A) : The Cro-Magnon man was the direct ancestor of the living modern man.
Reason (R) : Cro-Magnon man had slightly prognathous face.
In the light of the above statements, choose the correct answer from the options given below
- AIIMS - 2019
- evolution
- Given below are two statements, one is labelled as Assertion A and the other is labelled as Reason R
Assertion: Orbit of a satellite is within the gravitational field of earth whereas escaping is beyond the gravitational field of earth.
Reason: Orbital velocity of a satellite is greater than its escape velocity.
In the light of the above statements, choose the correct answer from the options given below- AIIMS - 2019
- Gravitation
Given below are two statements, one is labelled as Assertion A and the other is labelled as Reason R
Assertion (A) : In eukaryotes, transcription occurs in nucleus.
Reason (R) : In bacteria, transcription and translation occurs in cytoplasm.
In the light of the above statements, choose the correct answer from the options given below
- AIIMS - 2019
- Transcription
Concepts Used:
Semiconductors
Semiconductors are a crystalline solid materials, whose electrical conductivity lies between a conductor and an insulator. Semiconductors are mainly used in the manufacturing of electronic devices like capacitors, transistors, diodes, Integrated circuits, etc.
Properties of Semiconductor:
- Semiconductor acts like an insulator at Zero Kelvin. On increasing the temperature, it works as a conductor.
- Due to their exceptional electrical properties, semiconductors can be modified by doping to make semiconductor devices suitable for energy conversion, switches, and amplifiers.
- Lesser power losses.
Uses of Semiconductor:
- Semiconductors are widely used in manufacturing electronics devices like transistors, diodes, sensors, integrated circuits.
- Semiconductors are widely used in all electronic devices, like mobile phones, digital cameras, communication devices, trains, ATMs, etc.