A micro-ammeter gives full scale deflection at 100 $\mu$A. Its resistance is 2k$\Omega$. The resistance required to convert it to a voltmeter reading 1V is
- 1 k$\Omega$in series
- 8 k$\Omega$in series
- 1 k$\Omega$n parallel
- 8 k$\Omega$in parallel
The Correct Option is B
Solution and Explanation
Top Questions on Resistance
A battery of \( 6 \, \text{V} \) is connected to the circuit as shown below. The current \( I \) drawn from the battery is:
- MHT CET - 2024
- Physics
- Resistance
- Resistance of a wire is \( 8\Omega \). It is drawn in such a way that it experiences a longitudinal strain of \( 400% \). The final resistance of the wire is:
- AP EAMCET - 2024
- Physics
- Resistance
- A resistor of resistance \( R \), inductor of inductive reactance \( 2R \) and a capacitor of capacitive reactance \( X_C \) are connected in series to an A.C. source. If the series LCR circuit is in resonance, then the power factor of the circuit and the value \( X_C \) are respectively:
- AP EAMCET - 2024
- Physics
- Resistance
- A cell of emf 1.2 V and internal resistance 2 \( \Omega \) is connected in parallel to another cell of emf 1.5 V and internal resistance 1 \( \Omega \). If the like poles of the cells are connected together, the emf of the combination of the two cells is:
- AP EAMCET - 2024
- Physics
- Resistance
- Two wires A and B are made up of the same material and have the same mass. Wire A has radius \(2.0 \, \text{mm}\) and wire B has radius \(4.0 \, \text{mm}\). The resistance of wire B is \(2 \, \Omega\). The resistance of wire A is _____ \( \Omega \).
- JEE Main - 2024
- Physics
- Resistance
Questions Asked in WBJEE exam
- In the following sequence of reactions, compound 'M' is:
\( \text{M} \xrightarrow{\text{CH}_3\text{MgBr}} \text{N} + \text{CH}_4 \uparrow \xrightarrow{\text{H}^+} \text{CH}_3\text{COCH}_2\text{COCH}_3 \)
- WBJEE - 2024
- Organic Chemistry
Identify the ion having 4f\(^6\) electronic configuration.
- WBJEE - 2024
- Some Applications of d- and f-Block Elements
- Metallic conductors and semiconductors are heated separately. What are the changes in conductivity?
- WBJEE - 2024
- Conductivity-thermal and electrical
- The equivalent weight of \(\text{Na}_2\text{S}_2\text{O}_3\) (Gram molecular weight = \(M\)) in the given reaction is:
\[\text{I}_2 + 2 \text{Na}_2\text{S}_2\text{O}_3 \rightarrow 2 \text{NaI} + \text{Na}_2\text{S}_4\text{O}_6\]- WBJEE - 2024
- Redox reactions
- The reactivity order of the following molecules towards SN1 reaction is:
Allyl chloride (I), Chlorobenzene (II), Ethyl chloride (III)- WBJEE - 2024
- Reaction mechanisms
Concepts Used:
Resistance
Resistance is the measure of opposition applied by any object to the flow of electric current. A resistor is an electronic constituent that is used in the circuit with the purpose of offering that specific amount of resistance.
R=V/I
In this case,
v = Voltage across its ends
I = Current flowing through it
All materials resist current flow to some degree. They fall into one of two broad categories:
- Conductors: Materials that offer very little resistance where electrons can move easily. Examples: silver, copper, gold and aluminum.
- Insulators: Materials that present high resistance and restrict the flow of electrons. Examples: Rubber, paper, glass, wood and plastic.
Resistance measurements are normally taken to indicate the condition of a component or a circuit.
- The higher the resistance, the lower the current flow. If abnormally high, one possible cause (among many) could be damaged conductors due to burning or corrosion. All conductors give off some degree of heat, so overheating is an issue often associated with resistance.
- The lower the resistance, the higher the current flow. Possible causes: insulators damaged by moisture or overheating.