Question:
A mass of fibers lying indiscriminately in all directions, not spun or twisted into yarn and not interworked in any regular order, can be made into a firm fabric using processes involving heat, pressure, friction etc. is called as ................
A mass of fibers lying indiscriminately in all directions, not spun or twisted into yarn and not interworked in any regular order, can be made into a firm fabric using processes involving heat, pressure, friction etc. is called as ................
Show Hint
Felt is the most common example of a nonwoven fabric created by matting fibers with heat, moisture, and pressure.
Updated On: Sep 24, 2025
- Felt
- Jean
- Tweed
- Suede
Hide Solution
Verified By Collegedunia
The Correct Option is A
Solution and Explanation
Step 1: Understanding nonwoven fabrics.
Unlike woven or knitted fabrics, nonwovens are made directly from fibers without converting them into yarns. One common method is felting.
Step 2: Characteristics of felt.
Felt is made by matting fibers together using heat, moisture, pressure, and friction. The fibers interlock to form a firm fabric. This process does not require spinning or weaving.
Step 3: Elimination of options.
- (B) Jean: A woven fabric made of twill weave (not applicable).
- (C) Tweed: A woven woolen fabric, not a nonwoven.
- (D) Suede: A type of leather finish, not fiber-based.
Step 4: Conclusion.
Therefore, the correct answer is Felt.
Unlike woven or knitted fabrics, nonwovens are made directly from fibers without converting them into yarns. One common method is felting.
Step 2: Characteristics of felt.
Felt is made by matting fibers together using heat, moisture, pressure, and friction. The fibers interlock to form a firm fabric. This process does not require spinning or weaving.
Step 3: Elimination of options.
- (B) Jean: A woven fabric made of twill weave (not applicable).
- (C) Tweed: A woven woolen fabric, not a nonwoven.
- (D) Suede: A type of leather finish, not fiber-based.
Step 4: Conclusion.
Therefore, the correct answer is Felt.
Was this answer helpful?
0
0
Top Questions on Yarn
Match the LIST-I with LIST-II.
Choose the correct answer from the options given below:
Match the LIST-I with LIST-II
Choose the correct answer from the options given below:
- The diameter of yarn is ........... to the square roots of the cotton count.
- The cost of production of a woven fabric depends on ...........
A. Type of yarn used
B. Type of fiber used
C. Type of dyeing used
D. Thread Count of the fabric
- In triaxial weaving three sets of yarns (two warps and one weft) are woven at an angle of ........... degrees.
View More Questions
Questions Asked in CUET PG exam
- A rectangular section has width $b$ and depth $d$ and a symmetrical triangular section has base $b$ and depth $d$. The ratio of moment of inertia of rectangular section to that of triangular section with respect to their respective centroidal axis will be:
- CUET (PG) - 2025
- Strength of Materials
A weight of $500\,$N is held on a smooth plane inclined at $30^\circ$ to the horizontal by a force $P$ acting at $30^\circ$ to the inclined plane as shown. Then the value of force $P$ is:
- CUET (PG) - 2025
- Engineering Mechanics
A steel wire of $20$ mm diameter is bent into a circular shape of $10$ m radius. If modulus of elasticity of wire is $2\times10^{5}\ \text{N/mm}^2$, then the maximum bending stress induced in wire is:
- CUET (PG) - 2025
- Strength of Materials
- Shape of the "shear force diagram" for a simply supported beam subjected to pure moment $M$ at the center of span, will be:
- CUET (PG) - 2025
- Strength of Materials
- Which of the following statements is correct?
- CUET (PG) - 2025
- Strength of Materials
View More Questions