Question:
A furnace can supply heat steadily at 1200 K at a rate of 24000 kJ/min. The maximum amount of power (in kW) that can be produced by using the heat supplied by this furnace in an environment at 300 K is
A furnace can supply heat steadily at 1200 K at a rate of 24000 kJ/min. The maximum amount of power (in kW) that can be produced by using the heat supplied by this furnace in an environment at 300 K is
Updated On: Jul 9, 2024
- 300
- 150
- 18000
- 0
Hide Solution
Verified By Collegedunia
The Correct Option is A
Solution and Explanation
The correct option is (A): 300
Was this answer helpful?
0
0
Top Questions on Thermodynamic systems and processes
- A piston-cylinder arrangement shown in the figure has a stop located 2m above the base. The cylinder initially contains air at 140kPa and 350°C and the piston is resting in equilibrium at a position which is 1m above the stops. The system is now cooled to the ambient temperature of 25°C. Consider air to be an ideal gas with a value of gas constant R = 0.287kJ/(kg.K).
The absolute value of specific work done during the process is _____kJ/kg (rounded off to 1 decimal place)
- GATE Metallurgy - 2024
- Fluid Mechanics and Thermal Sciences
- Thermodynamic systems and processes
Questions Asked in GATE Metallurgy exam
- At the instant when OP is vertical and AP is horizontal, the link OD is rotating counter clockwise at a constant rate w=7rad/s. Pin P on link OD slides in the slot BC of link ABC which is hinged at A, and causes a clockwise rotation of the link ABC. The magnitude of angular velocity of link ABC for this instant is _____rad/s (rounded off to 2 decimal places).
- GATE Metallurgy - 2024
- Principles of the design of machine elements such as bolted, riveted and welded joints
- In an arc welding process, the voltage and current are 30V and 200A, respectively. The cross-sectional area of the joint is 20 mm2 and the welding speed is 5mm/s. The heat required to melt the material is 20 J/s. The percentage of heat lost to the surrounding during the welding process is ____(rounded off to 2 decimal places).
- GATE Metallurgy - 2024
- Principles of welding, brazing, soldering and adhesive bonding
- Let f(z) be an analytic function, where z = x + iy. If the real part of f(z) is cosh x cos y, and the imaginary part of f(z) is zero for y = 0, then f(z) is
- GATE Metallurgy - 2024
- Analytic functions
- Steady, compressible flow of air takes place through an adiabatic converging- diverging nozzle, as shown in the figure. For a particular value of pressure difference across the nozzle, a stationary normal shock wave forms in the diverging section of the nozzle. If E and F denote the flow conditions just upstream and downstream of the normal shock, respectively, which of the following statement(s) is/are TRUE?
- GATE Metallurgy - 2024
- Basics of compressible fluid flow
- A set of jobs U, V, W, X, Y, Z arrive at time t = 0 to a production line consisting of two workstations in series. Each job must be processed by both workstations in sequence (i.e., the first followed by the second). The process times (in minutes) for each job on each workstation in the production line are given below.
Job U V W X Y Z Workstation 1 5 7 3 4 6 8 Workstation 2 4 6 6 8 5 7
The sequence in which the jobs must be processed by the production line if the total makespan of production is to be minimized is- GATE Metallurgy - 2024
- Principles of non-traditional machining processes
View More Questions