A black body at $227^{\circ} C$ radiates heat at the rate of $7\, cals / cm ^{2} s$. At a temperature of $727^{\circ} C$, the rate of heat radiated in the same units will be :
- 50
- 112
- 80
- 60
The Correct Option is B
Solution and Explanation
$\frac{ P _{2}}{ P _{1}}=\left(\frac{1000}{500}\right)^{4}$
$P _{2}=16 P _{1}=112$
Top Questions on Heat Transfer
Three conductors of same length having thermal conductivity \(k_1\), \(k_2\), and \(k_3\) are connected as shown in figure. Area of cross sections of 1st and 2nd conductor are same and for 3rd conductor it is double of the 1st conductor. The temperatures are given in the figure. In steady state condition, the value of θ is ________ °C. (Given: \(k_1\) = 60 Js⁻¹m⁻¹K⁻¹,\(k_2\) = 120 Js⁻¹m⁻¹K⁻¹, \(k_3\) = 135 Js⁻¹m⁻¹K⁻¹)
- JEE Main - 2025
- Physics
- Heat Transfer
- Two spherical bodies of same materials having radii 0.2 m and 0.8 m are placed in same atmosphere. The temperature of the smaller body is 800 K and temperature of bigger body is 400 K. If the energy radiate from the smaller body is E, the energy radiated from the bigger body is (assume, effect of the surrounding to be negligible):
- JEE Main - 2025
- Physics
- Heat Transfer
- Two cylindrical rods A and B made of different materials, are joined in a straight line. The ratio of lengths, radii and thermal conductivities of these rods are : $ \frac{L_A}{L_B} = \frac{1}{2} $, $ \frac{r_A}{r_B} = 2 $, and $ \frac{K_A}{K_B} = \frac{1}{2} $. The free ends of rods A and B are maintained at $ 400 \, K $, $ 200 \, K $, respectively. The temperature of rods interface is ____ K, when equilibrium is established.
- JEE Main - 2025
- Physics
- Heat Transfer
- A wire of length 10 cm and diameter 0.5 mm is used in a bulb. The temperature of the wire is 1727°C and power radiated by the wire is 94.2 W. Its emissivity is $ \frac{x}{8} $, where $ x = \ldots $
- JEE Main - 2025
- Physics
- Heat Transfer
- A horizontal pipe carries water in a streamlined flow. At a point along the pipe, where the cross-sectional area is \( 10 \, \text{cm}^2 \), the velocity of water is 1 m/s and the pressure is 2000 Pa. What is the pressure of water at another point where the cross-sectional area is \( 5 \, \text{cm}^2 \)? [Density of water = 1000 kg/m³]
- KCET - 2025
- Physics
- Heat Transfer
Questions Asked in NEET exam
- Given below are two statements:
Statement I: Fig fruit is a non-vegetarian fruit as it has enclosed fig wasps in it.
Statement II: Fig wasp and fig tree exhibit a mutual relationship as the fig wasp completes its life cycle in the fig fruit and the fig fruit gets pollinated by the fig wasp. - An oxygen cylinder of volume 30 litre has 18.20 moles of oxygen. After some oxygen is withdrawn from the cylinder, its gauge pressure drops to 11 atmospheric pressure at temperature \(27^\circ\)C. The mass of the oxygen withdrawn from the cylinder is nearly equal to: [Given, \(R = \frac{100}{12} \text{ J mol}^{-1} \text{K}^{-1}\), and molecular mass of \(O_2 = 32 \text{ g/mol}\), 1 atm pressure = \(1.01 \times 10^5 \text{ N/m}^2\)]
- NEET (UG) - 2025
- Ideal-gas equation and absolute temperature
- A wire of resistance \(R\) is cut into 8 equal pieces. From these pieces, two equivalent resistances are made by adding four of these together in parallel. Then these two are added in series. The net effective resistance of the combination is:
- NEET (UG) - 2025
- Resistance
The current passing through the battery in the given circuit, is:
- NEET (UG) - 2025
- Current electricity
Three identical heat conducting rods are connected in series as shown in the figure. The rods on the sides have thermal conductivity 2K while that in the middle has thermal conductivity K. The left end of the combination is maintained at temperature 3T and the right end at T. The rods are thermally insulated from outside. In steady state, temperature at the left junction is \(T_1\) and that at the right junction is \(T_2\). The ratio \(T_1 / T_2\) is
- NEET (UG) - 2025
- Conductivity-thermal and electrical
Concepts Used:
Heat Transfer
What is Heat Transfer?
It is defined as the movement of heat across the border of the system due to a difference in temperature between system and its surroundings.
How is Heat Transferred?
Heat can travel from one place to another in several ways. The different modes of heat transfer include:
- Conduction - Heat flows from things with higher temp to objects with lower temp.
- Convection - Movement of liquid molecules from higher temp regions to lower temp regions.
- Radiation - Radiant heat is present in every other way in our daily lives. Thermal radiations are also known to as radiant heat. Thermal radiation is generated by the emission of electromagnetic waves.
