A black body at 1227°C emits radiations with maximum intensity at a wavelength of 5000 Å. If the temperature of the body is increased by 1000°C, the maximum intensity will be observed at :
- 7500 Å
- 1500 Å
- 6000 Å
- 3000 Å
The Correct Option is D
Solution and Explanation
By using the Wiens displacement rule, mT= b,
we can calculate the following: (5000)(1500)
= (m )(1500+1000), =m = 2500(500)(1500) = 3000Å
Therefore, the correct option is (D): 3000 Å
Top Questions on thermal properties of matter
- A 200 g sample of water at 80°C is mixed with 100 g of water at 20°C. Assuming no heat loss to the surroundings, what is the final temperature of the mixture?
- MHT CET - 2025
- Physics
- thermal properties of matter
- The resistance of a wire at 25°C is 10.0 \( \Omega \). When heated to 125°C, its resistance becomes 10.5 \( \Omega \). Find (i) the temperature coefficient of resistance of the wire, and (ii) the resistance of the wire at 425°C.
- CBSE CLASS XII - 2025
- Physics
- thermal properties of matter
- If the longitudinal strain of a stretched wire is 0.2% and the Poisson's ratio of the material of the wire is 0.3, then the volume strain of the wire is
- AP EAPCET - 2025
- Physics
- thermal properties of matter
- Highest limiting conductance at 298 K is:
- KEAM - 2025
- Physics
- thermal properties of matter
- An equiconvex lens of power P is cut perpendicular to its principal axis, into 2 equal parts, power of each part?
- KEAM - 2025
- Physics
- thermal properties of matter
Questions Asked in NEET exam
The current passing through the battery in the given circuit, is:
- NEET (UG) - 2025
- Current electricity
A bob of heavy mass \(m\) is suspended by a light string of length \(l\). The bob is given a horizontal velocity \(v_0\) as shown in figure. If the string gets slack at some point P making an angle \( \theta \) from the horizontal, the ratio of the speed \(v\) of the bob at point P to its initial speed \(v_0\) is :
- NEET (UG) - 2025
- Pendulums
- Two cities X and Y are connected by a regular bus service with a bus leaving in either direction every T min. A girl is driving scooty with a speed of 60 km/h in the direction X to Y. She notices that a bus goes past her every 30 minutes in the direction of her motion, and every 10 minutes in the opposite direction. Choose the correct option for the period T of the bus service and the speed (assumed constant) of the buses.
- NEET (UG) - 2025
- Relative Velocity
- The intensity of transmitted light when a polaroid sheet, placed between two crossed polaroids at \(22.5^\circ\) from the polarization axis of one of the polaroids (\(I_0\) is the intensity of polarised light after passing through the first polaroid):
- NEET (UG) - 2025
- Polarization
A full wave rectifier circuit with diodes (\(D_1\)) and (\(D_2\)) is shown in the figure. If input supply voltage \(V_{in} = 220 \sin(100 \pi t)\) volt, then at \(t = 15\) msec:
- NEET (UG) - 2025
- Semiconductor Diode
Concepts Used:
Thermal Properties of Matter
Anything that has mass or occupies space in the universe is commonly known as matter. There are five properties of matters namely chemical, mechanical, thermal, dimensional, and physical properties.
Read More: Thermal Properties of Matter
Heat Capacity:
The quantity of heat needed to change the temperature of the matter by 1° is known as the heat capacity of a material. The temperature is indicated in kelvin or Celsius and the amount of heat is shown in calories or joules. Specific heat capacity or molar heat capacity is used to calculate the heat capacity of the matter with the stated dimension.
Linear expansion is the situation when change takes place in one dimension or dimensional.
Thermal Expansion:
When heat is passed through the material, the change in the area, volume, and shape is recognized as the thermal expansion property of the material. The expansion of the railway tracks due to maximal heat which leads to accidents is an example of thermal expansion.
Thermal Conductivity:
This property is interconnected to the conductivity of heat. The amount of heat regulated by the material is directly proportional to the conductivity of the material. Not all objects have the capacity to conduct heat throughout their bodies. Insulators are such objects which do not have the property to conduct heat throughout their body.
Thermal Stress:
The stress due to thermal contraction or expansion of the body is known as thermal stress. The explosion of materials takes place due to thermal stress which is dangerous. The cracks on the truck tyres are caused by an outcome of thermal stress. Trucks at high speed generate heat which is caused by the friction of the truck tyres and the road surface.