Question:
A band brake shown in the figure has a coefficient of friction of 0.3. The band can take a maximum force of 1.5 kN. The maximum braking force (F) that can be safely applied is _____N (rounded off to the nearest integer).
A band brake shown in the figure has a coefficient of friction of 0.3. The band can take a maximum force of 1.5 kN. The maximum braking force (F) that can be safely applied is _____N (rounded off to the nearest integer).
Updated On: Jul 9, 2024
Hide Solution
Verified By Collegedunia
Correct Answer: 115
Solution and Explanation
The correct answer is:115 to 119
Was this answer helpful?
0
0
Top Questions on Friction and its applications including rolling friction, belt-pulley, brakes, screw jack,etc
- A band brake shown in the figure has a coefficient of friction of 0.3. The band can take a maximum force of 1.5 kN. The maximum braking force (F) that can be safety applied is ______ N. (Answer in integers)
- GATE Metallurgy
- Applied Mechanics and Design
- Friction and its applications including rolling friction, belt-pulley, brakes, screw jack,etc
Questions Asked in GATE Metallurgy exam
- A vibratory system consists of mass m, a vertical spring of stiffness 2k and a horizontal spring of stiffness k. The end A of the horizontal spring is given a horizontal motion xA = αsinwt. The other end of the spring is connected to an inextensible rope that passes over two massless pulleys as shown. Assume m = 10 kg, k = 1.5 kN/m, and neglect friction. The magnitude of critical driving frequency for which the oscillations of mass m tend to become excessively large is ____rad/s (answer in integer).
- GATE Metallurgy - 2024
- Free and forced vibration of single degree of freedom systems
- A ram in the form of a rectangular body of size l=9m and b=2m is suspended by two parallel ropes of lengths 7m. Assume the center-of-mass of the body is at its geometric center and g = 9.81m/s2. For striking the object P with a horizontal velocity of 5m/s, what is the angle θ with the vertical from which the ram should be released from rest?
- GATE Metallurgy - 2024
- Forces on submerged bodies
- If the value of the double integral
\(\displaystyle\int^{4}_{x=3}\displaystyle\int^{2}_{y=1}\frac{dydx}{(x+y)^2}\)
is \(\log e (\frac{a}{24})\), then a is ____ (answer in integer).- GATE Metallurgy - 2024
- Integration by trapezoidal and Simpson’s rules
- If x(t) satisfies the differential equation
\(t\frac{dx}{dt}+(t-x)=0\)
subject to the condition x(1) = 0, then the value of x(2) is_____(rounded off to 2 decimal places).- GATE Metallurgy - 2024
- Higher order linear ODEs with constant coefficients
- The value of the surface integral
\(\displaystyle\oiint_{s}zdxdy\)
where S is the external surface of the sphere x2 + y2 + z2 = R2 is- GATE Metallurgy - 2024
- Vector identities
View More Questions