List of top Engineering Graphics Questions

Choose the incorrect statement for Sleeve and cotter joint :
Turnbuckle joint is not used in _____.
In flange pipe joint, both flanges with gasket in between them are connected together by____.
Match List - I with List - II.
List - IList -II
(Solids)(Their Features)
(A) Prism(I) Base is a circle.
(B) Pyramid(II) Two similar ends and rectangular faces. 
(C) Cone(III) Two circular faces and one curved surface.
(D) Cylinder(IV) One base and slant triangular faces.
Choose the correct answer from the options given below:
Match List - I with List - II.
List - IList -II
(Solids)(Their Features)
(A)Angle of Line indicating Isometric lengths with base line(I) \(15\degree\)
(B) Angle of line showing true lengths with base line.(II) \(30\degree\)
(C) Angle between lines showing isometric lengths and true lengths.(III) \(45\degree\)
(D) Angle of projectors with base line.(IV) \(90\degree\)
Choose the correct answer from the options given below:
In Gib and cotter joint, if the thickness of cotter is 8 mm, then thickness of gib will be______.
It is a cylindrical piece of metal having threads at both ends and non threaded portion of square cross-section at the centre.
The shape of cotter is _____.
Open bearing is useful for shafts rotating at
Two continous thick circles are shown in the top view of vertical _________.
In the top view of a vertical stud, two complete and one broken circle is shown in
The head thickness of a Snap head rivet is ____.(Where d is rivet diameter)
We need true _____to draw orthographic views.

Read the following paragraph and answer the questions given below:
The given image is a fire-extinguisher. It is made up of a bigger cylindrical tank with a hemispherical portion on it. A very small cylindrical portion at the top has a valve assembly and a hose. Assume that the diameter of the hemispherical portion as 140 mm and height of the bottom cylindered portion as 350 mm.

Read the following paragraph and answer the questions given below:
Grub screw, also known as set screw, is a type of fixing screw that is most often used to join one component or part securely to another. Grub screws are used to hold parts like sleeve, collar, gear etc. on a shaft to prevent relative motion. It is represented by thread size such as M8, M10 etc. Where M stands for metric thread and the numeral represents the diameter of screw in millimeter.