>
CUET (PG)
>
Textile Design
List of top Textile Design Questions asked in CUET (PG)
Twill weave variations in woven fabrics are:
CUET (PG) - 2025
CUET (PG)
Textile Design
Textiles
The necessary weave at the beginning of each warp to spread out the warp ends evenly and to close the gaps left when knotting the warp to the front stick/warp beam in table top loom weaving is called as ................
CUET (PG) - 2025
CUET (PG)
Textile Design
Loom shed
A mass of fibers lying indiscriminately in all directions, not spun or twisted into yarn and not interworked in any regular order, can be made into a firm fabric using processes involving heat, pressure, friction etc. is called as ................
CUET (PG) - 2025
CUET (PG)
Textile Design
Yarn
Kinkhab is a kind of ........... textiles.
CUET (PG) - 2025
CUET (PG)
Textile Design
Textiles
In which village of Andhra Pradesh square double Ikat Telias are produced.
CUET (PG) - 2025
CUET (PG)
Textile Design
Textiles
The Institutes of Handloom Technology were established in the year ...........
CUET (PG) - 2025
CUET (PG)
Textile Design
Loom shed
The ............... is the space between the two halves of the warp in which the weaver places the weft thread/yarn just after the reed while weaving on a loom.
CUET (PG) - 2025
CUET (PG)
Textile Design
Yarn
Himroo is a cotton warp and silk weft brocade produced at ..........., Maharashtra.
CUET (PG) - 2025
CUET (PG)
Textile Design
Textiles
The double ikat work of Gujarat, Orissa and Andhra Pradesh is ........... weave.
CUET (PG) - 2025
CUET (PG)
Textile Design
Textiles
Use of textiles made of cotton, linen and silk between the 15th century and 2nd centuries BC is mentioned in ...........
A. Ramayana
B. Buddhist sources
C. Mahabharata
D. Islamic literature
Choose the correct answer from the options given below:
CUET (PG) - 2025
CUET (PG)
Textile Design
Textiles
Chintz term is used for ........... textiles.
CUET (PG) - 2025
CUET (PG)
Textile Design
Textiles
Calculate the count of the threefold cotton yarn composed of 20s, 15s and 12s singles.
CUET (PG) - 2025
CUET (PG)
Textile Design
Yarn
Calculate the total number of ends/yarn in 36 inches wide fabric with 76 reed count and 0.5 inch of selvedge on each side (assuming 2 ends/yarn per dent for body as well as for selvedge).
CUET (PG) - 2025
CUET (PG)
Textile Design
Yarn
Twill weave is used in which of the below mentioned fabrics:
A. Serge
B. Gabardine
C. Tweed
D. Surah
CUET (PG) - 2025
CUET (PG)
Textile Design
Textiles
Carriers are organic compounds that accelerate the disperse dyeing process when added in the bath. Examples of water insoluble carriers are:
A. Trichlorobenzene
B. Diphenol
C. Benzoic Acid
D. O-phenylphenol
Choose the correct answer from the options given below:
CUET (PG) - 2025
CUET (PG)
Textile Design
Textiles
Titanium Oxide and Geranium Oxide are added in dope solution before spinning of the manufactured fibers as:
CUET (PG) - 2025
CUET (PG)
Textile Design
Polymers and Fiber Materials
114 meters of yarn was found to weigh 3 grammes. Calculate the count of the yarn.
CUET (PG) - 2025
CUET (PG)
Textile Design
Yarn
List the basic fabric weaves from the weaves mentioned below.
(A) Rib Weave
(B) Twill Weave
(C) Basket Weave
(D) Lappet Weave
Choose the correct answer from the options given below:
CUET (PG) - 2025
CUET (PG)
Textile Design
Textiles
It is a comb-like device placed between the heddle/harnesses and the cloth/fabric beam on a hand loom.
CUET (PG) - 2025
CUET (PG)
Textile Design
Loom shed
Select the extra step which is used in Worsted yarn spinning than Woolen yarn spinning.
CUET (PG) - 2025
CUET (PG)
Textile Design
Yarn
Corded complex yarns consist of:
A. Base Yarn
B. Effect Yarn
C. Binder Yarn
D. Fancy Yarn
Choose the correct answer from the options given below:
CUET (PG) - 2025
CUET (PG)
Textile Design
Yarn
The yarns produced by splitting or slitting of sheets of material are called as ...........
CUET (PG) - 2025
CUET (PG)
Textile Design
Textiles
Ring spinning machine was invented by:
CUET (PG) - 2025
CUET (PG)
Textile Design
Textiles
Copolymers are polymerized from two or more different monomers. The subcategories of copolymers are:
(A) Random Copolymer
(B) Block Copolymer
(C) Alternating Copolymer
(D) Graft Copolymer
Choose the correct answer from the options given below:
CUET (PG) - 2025
CUET (PG)
Textile Design
Polymer Chemistry
With this type of polymerization in fibers the monomers add or join end to end and liberate by-product/s.
CUET (PG) - 2025
CUET (PG)
Textile Design
Polymer Chemistry
Prev
1
2
3
Next