Question:
Which option is the correct mirror image of the figure given on the left?
Which option is the correct mirror image of the figure given on the left?
Updated On: June 02, 2025
Hide Solution
Verified By Collegedunia
The Correct Option is C
Solution and Explanation
The correct answer is: Option C: 
Was this answer helpful?
0
0
Top Questions on Spatial Relations
- Consider an imaging system with 128×128 pixels that produces a noiseless, distortion-free digital image. It is used to digitize checkerboard patterns where all squares of the pattern are in the field of view. Using this imaging system, if a checkerboard pattern with 128×128 squares is digitized, each square will be 1×1 pixel in size. What is the size of the checkerboard square in the generated digital image for which spatial aliasing is observed (measured in pixels of the imaging system)?
- GATE GE - 2025
- Remote Sensing
- Spatial Relations
Consider the three input raster images given below. A geospatial analyst decided to use the overlay operation to generate a new raster showing the average values. The values of the cells P, Q, and R in the output raster are:
Input raster
5 2 3 1 2 2 3 1 1 →
1 3 2 4 7 5 1 1 1 →
3 4 1 4 3 2 2 1 1
Output raster
P Q R - - - - - - - GATE GE - 2025
- Remote Sensing
- Spatial Relations
Find the best match between column I and column II for the following scenario related to spatial operators.
- GATE GE - 2025
- Remote Sensing
- Spatial Relations
- Which option will replace the question mark?
- UCEED - 2024
- Visualization and spatial reasoning
- Spatial Relations
- An irregular piece of paper is folded and cut as shown below. Which option shows the correct cuts when the paper is unfolded?
- UCEED - 2024
- Visualization and spatial reasoning
- Spatial Relations
View More Questions
Questions Asked in UCEED exam
- A wooden block of dimension 10cm x 20cm x 30cm is cut into equal sized planks. The cut planks are stacked one above the other to achieve a total height of 100cm exactly. If the minimum number of planks are cut to achieve this height, then what is the volume of each plank in cm3?
- UCEED - 2024
- Mathematics
- If the image on the left is flipped horizontally (about Y-axis), and then rotated 180 degrees, what will be the resulting image?
- UCEED - 2024
- Geometric Transformations
- What is the maximum number of complete circles that will be seen, if the strips given below are re-arranged without rotating?
- UCEED - 2024
- Pattern Recognition
- What are the minimum number of tile pieces (shown on the right) that are required to create a path from tile A to tile B, such that ALL the following conditions are met:
- All tiles are to be used at least once.
- Tiles cannot overlap.
- The path on a tile must be connected to another path of a tile.
- The same type of tile cannot be used one-after-the other in a sequence.
- Rotation of the tiles is not allowed.
- Exclude tile A and tile B from the count.
- UCEED - 2024
- Shading and Rendering
- Which of the options can be created by the stamp shown on the left?
- UCEED - 2024
- Pattern Recognition
View More Questions
