Question:
Which of the following is not a feature of CSI fed AC motor drive?
Which of the following is not a feature of CSI fed AC motor drive?
Show Hint
CSI drives need feedback diodes for commutation—this is essential.
Updated On: May 23, 2025
- Used in high power drives
- Open loop control is not possible
- Feed-back diodes are not required
- Multi-motor operation is possible
Hide Solution
Verified By Collegedunia
The Correct Option is C
Solution and Explanation
Features of a Current Source Inverter (CSI) fed AC motor drive:
- Suitable for high power applications
- Can operate in open loop and closed loop
- Requires feedback diodes for proper commutation
- Supports multi-motor operation
Thus, the incorrect feature is: "Feed-back diodes are not required"
- Suitable for high power applications
- Can operate in open loop and closed loop
- Requires feedback diodes for proper commutation
- Supports multi-motor operation
Thus, the incorrect feature is: "Feed-back diodes are not required"
Was this answer helpful?
0
0
Top Questions on Power Electronics
- The frequency modulation of a 3-\(\phi\) sinusoidal pulse width modulation is an odd multiple of 3. Then the output line voltage contains
- TS PGECET - 2024
- Electrical Engineering
- Power Electronics
- Which of the following triggering circuits can be used in feed-back control systems?
- TS PGECET - 2024
- Electrical Engineering
- Power Electronics
- Design minimum value of capacitance \( C \) needed for a Buck converter with a frequency \( f = 100 \, \text{kHz} \) so that ripple voltage \( V_r \) is less than 1% of output voltage \( V_o \). Assume the duty ratio \( \delta = 0.6 \) and inductor \( L = 25 \, \mu H \).
- TS PGECET - 2024
- Electrical Engineering
- Power Electronics
- A 1-\(\phi\) inverter is fed with an RLC series load of \( R = 1\,\Omega, X_L = 6\,\Omega \) and \( X_C = 7\,\Omega \). Then the phase angle between fundamental current and third harmonic voltage is
- TS PGECET - 2024
- Electrical Engineering
- Power Electronics
- A 3-\(\phi\) semi-converter drives a dc motor which runs at a rated speed of 1000 rpm at \( 0^\circ \) firing angle. Find the speed of the motor when firing angle is \( 60^\circ \).
- TS PGECET - 2024
- Electrical Engineering
- Power Electronics
View More Questions
Questions Asked in TS PGECET exam
When the enable data input \( D = 1 \), select inputs \( S_1 = S_0 = 0 \) in the 1×4 Demultiplexer, then the outputs \( Y_0, Y_1, Y_2, Y_3 \) are
- TS PGECET - 2024
- Analog and Digital Electronics
The \( Z \) parameter \( Z_{21} \) of the following circuit is
- TS PGECET - 2024
- Electric circuits and fields
The \( h \) parameters of the following circuit is
- TS PGECET - 2024
- Electric circuits and fields
For an input voltage \( v = 10 \sin 1000t \), the Thevenin's impedance at the terminals X and Y for the following circuit is
- TS PGECET - 2024
- Electric circuits and fields
- Newton-Raphson iterative formula for finding \[ \frac{1}{\sqrt{N}}, (N>0) \] is
- TS PGECET - 2024
- Newton Raphson Method
View More Questions