Question:
What is the CORRECT match between the survey instruments/parts of instruments shown in the table and the operations carried out with them ?Instruments/Parts of instruments Operations P Bubble tube i Tacheometry Q Plumb bob ii Minor movements R Tangent screw iii Centering S Stadia cross-wire iv Levelling
What is the CORRECT match between the survey instruments/parts of instruments shown in the table and the operations carried out with them ?
| Instruments/Parts of instruments | Operations | ||
| P | Bubble tube | i | Tacheometry |
| Q | Plumb bob | ii | Minor movements |
| R | Tangent screw | iii | Centering |
| S | Stadia cross-wire | iv | Levelling |
Updated On: Feb 3, 2026
- P-ii, Q-iii, R-iv, S-i
- P-iv, Q-iii, R-ii, S-i
- P-i, Q-iii, R-ii, S-iv
- P-iii, Q-iv, R-i, S-ii
Hide Solution
Verified By Collegedunia
The Correct Option is B
Solution and Explanation
The correct option is (B) : P-iv, Q-iii, R-ii, S-i.
Was this answer helpful?
1
0
Top Questions on Principles of surveying
- To finalize the direction of a survey, four surveyors set up a theodolite at a station P and performed all the temporary adjustments. From the station P, each of the surveyors observed the bearing to a tower located at station Q with the same instrument without shifting it. The bearings observed by the surveyors are 30° 30' 00", 30° 29′ 40′′, 30° 30′ 20′′ and 30° 31′ 20′′. Assuming that each measurement is taken with equal precision, the most probable value of the bearing is
- GATE CE - 2024
- Geomatics Engineering
- Principles of surveying
- For a reconnaissance survey, it is necessary to obtain vertical aerial photographs of a terrain at an average scale of 1: 13000 using a camera. If the permissible flying height is assumed as 3000 m above a datum and the average terrain elevation is 1050 m above the datum, the required focal length (in mm) of the camera is
- GATE CE - 2024
- Geomatics Engineering
- Principles of surveying
- A surveyor observes a zenith angle of 93° 00' 00" during a theodolite survey. The corresponding vertical angle is
- GATE CE - 2024
- Geomatics Engineering
- Principles of surveying
- Which of the following statistical classification algorithms is/are represented by the figure given below?
- GATE GE - 2024
- Geomatics Engineering
- Principles of surveying
- Which of the following statements about Principal Component Analysis (PCA) is/are CORRECT?
- GATE GE - 2024
- Geomatics Engineering
- Principles of surveying
View More Questions
Questions Asked in GATE CE exam
- The President, along with the Council of Ministers, ............. to visit India next week.
- GATE CE - 2025
- Subject Verb Agreement
Consider a five-digit number PQRST that has distinct digits P, Q, R, S, and T, and satisfies the following conditions:
1. \( P<Q \)
2. \( S>P>T \)
3. \( R<T \)
If integers 1 through 5 are used to construct such a number, the value of P is:
- GATE CE - 2025
- Logical and Analytical Reasoning Skills
- Given the following staff readings at two levels, determine the Reduced Level (RL) of B.
Given: - RL of A = 150 m - Find RL of B- GATE CE - 2025
- Surveying and Levelling
- Given the bearing N30°W, determine the corresponding Whole Circle Bearing (WCB). \
Given: - Bearing = N30°W - Find WCB- GATE CE - 2025
- Surveying and Levelling
- Given the following data, determine the final water content \( W_2 \):
Given: - \( W_1 = 18\% \) - \( G_p = 2.74 \) - \( S_1 = 0.65 \) - \( S_2 = 0.852 \) - Find \( W_2 \)- GATE CE - 2025
- Soil Mechanics
View More Questions