Water rises in a vertical capillary tube upto a length of $10 \,cm$. If the tube is inclined at $ 45{}^\circ $ , the length of water column risen in the tube will be
- $ 10\,cm $
- $ 10\,\sqrt{2}\,cm $
- $ 5\,\sqrt{2}\,cm $
- $ 20\,cm $
The Correct Option is B
Solution and Explanation
Top Questions on mechanical properties of fluid
- As shown in the figure, a liquid is at the same levels in two arms of a U-tube of uniform cross-section when at rest. If the U-tube moves with an acceleration 'f' towards the right,the difference in liquid heights between the two arms of the U-tube will be,(acceleration due to gravity=g)
- WBJEE - 2023
- Physics
- mechanical properties of fluid
If 1000 droplets of water of surface tension 0.07 N/m, having same radius 1 mm each, combine to from a single drop In the process the released surface energy is - (Take π=\(\frac {22}{7}\))
- JEE Main - 2023
- Physics
- mechanical properties of fluid
- The surface of water in a water tank of cross section area $750\, cm ^2$ on the top of a house is $h m$ above the tap level The speed of water coming out through the tap of cross section area $500 mm ^2$ is $30\, cm / s$ At that instant, $\frac{d h}{d t}$ is $x \times 10^{-3}\, m / s$ The value of $x$ will be ____
- JEE Main - 2023
- Physics
- mechanical properties of fluid
- A Spherical ball of radius $1 \,mm$ and density $10.5\, g / cc$ is dropped in glycerine of coefficient of viscosity $9.8$ poise and density $1.5 \,g / cc$ Viscous force on the ball when it attains constant velocity is $3696 \times 10^{-x} N$. The value of $x$ is_______.
(Given, $g=9.8 \,m / s ^2$ and $\pi=\frac{22}{9}$ )- JEE Main - 2023
- Physics
- mechanical properties of fluid
- A fully loaded boeing aircraft has a mass of $5.4×10^5 $ kg. Its total wing area is $500 m^2$. It is in level flight with a speed of 1080 km/h. If the density of air 𝜌 is $1.2 kg m^{−3}$, the fractional increase in the speed of the air on the upper surface of the wing relative to the lower surface in percentage will be. ($𝑔=10 m/s^2$)
- JEE Main - 2023
- Physics
- mechanical properties of fluid
Questions Asked in Rajasthan PMT exam
- 300 cal of heat is supplied to raise the temperature of 50 g of air from $ 20{}^\circ C $ to $ 30{}^\circ C $ without any change in its volume. Change in internal energy per gram of air is
- Rajasthan PMT - 2011
- internal energy
- Block A of mass 4 kg and block B of mass 6 kg are resting on a horizontal surface as shown in the figure. There is no friction between the block B and the horizontal surface. The coefficient of friction between the blocks is 0.2. If the value of $ g=10\,m/{{s}^{2}}, $ the maximum horizontal force F that can be applied on block B without any relative motion between A and B is
- The excess pressure inside a soap bubble A is twice that in another soap bubble B. The ratio of volumes of A and B is
- Rajasthan PMT - 2011
- Surface tension
- The unit of surface tension is
- Rajasthan PMT - 2011
- Surface tension
- A thin rectangular magnet suspended freely has a period of oscillation equal to $T$. Now, it is broken into two equal halves (each having half of the original length) and one piece is made to oscillate freely in the same field. 1f its period of oscillation is $T'$, the ratio $T'/T$ is
- Rajasthan PMT - 2011
- Moving charges and magnetism
Concepts Used:
Mechanical Properties of Fluid
The science of the mechanical properties of fluids is called Hydrostatics. A fluid is a substance that relents to the slightest pressure. Fluids are categorized into two classes famed by the names of liquids, and elastic fluids or gases, which later comprehend the air of the atmosphere and all the different kinds of air with which chemistry makes us acquainted.
Streamline Flow:
A streamline is a curve the tangent to which at any point provides the direction of the fluid velocity at that point. It is comparable to a line of force in an electric or magnetic field. In steady flow, the pattern of the streamline is motionless or static with time, and therefore, a streamline provides the actual path of a fluid particle.
Tube of Flow:
A tubular region of fluid enclosed by a boundary comprises streamlines is called a tube of flow. Fluid can never cross the boundaries of a tube of flow and therefore, a tube of flow acts as a pipe of the same shape.
Surface Tension and Viscosity:
The surface tension of a liquid is all the time a function of the solid or fluid with which the liquid is in contact. If a value for surface tension is provided in a table for oil, water, mercury, or whatever, and the contacting fluid is unspecified, it is safe to consider that the contacting fluid is air.