Question:
Using the following data, the spatial resolution of a push-broom sensor is _________ m (in integer).
Data:
Orbital altitude (above earth surface) = 1000 km
Number of spectral bands = 5
Number of detectors/CCDs (charged coupled devices) in a row = 4000
Ground swath = 20 km
Using the following data, the spatial resolution of a push-broom sensor is _________ m (in integer).
Data:
Orbital altitude (above earth surface) = 1000 km
Number of spectral bands = 5
Number of detectors/CCDs (charged coupled devices) in a row = 4000
Ground swath = 20 km
Data:
Orbital altitude (above earth surface) = 1000 km
Number of spectral bands = 5
Number of detectors/CCDs (charged coupled devices) in a row = 4000
Ground swath = 20 km
Updated On: Jan 26, 2025
Hide Solution
Verified By Collegedunia
Correct Answer: 5
Solution and Explanation
The correct answer is : 5 (approx.)
Was this answer helpful?
0
4
Top Questions on Photogrammetry and Remote Sensing
- Using the given 3 × 3 pixel kernel and original image and applying the concept of convolution, the value of central pixel of the output image is _____ (in integer).
- GATE CE - 2024
- Geomatics Engineering
- Photogrammetry and Remote Sensing
- A high tower appeared on an aerial photograph taken at 1000 m above mean sea level with a camera lens of 15 cm focal length. The radial distances of the top and bottom images of the tower from principal point of photograph are 92.6 mm and 78.3 mm, respectively. If the average elevation of terrain is 300 m above mean sea level, then the height of the tower above ground is _________ m (rounded off to the nearest integer).
- GATE CE - 2024
- Geomatics Engineering
- Photogrammetry and Remote Sensing
- A four-band multispectral image with pixel size of 50 m x 50 m covers a ground area of 20 km × 20 km. If the radiometric resolution of the satellite data is 8 bits, then the uncompressed satellite image contains _______ kilobytes (kB) of data (in integer).
- GATE CE - 2024
- Geomatics Engineering
- Photogrammetry and Remote Sensing
- Which of the following statements about image ratio is/are CORRECT?
- GATE CE - 2024
- Geomatics Engineering
- Photogrammetry and Remote Sensing
- Which of the following filters can be used to suppress the low frequency component of a raster image?
- GATE CE - 2024
- Geomatics Engineering
- Photogrammetry and Remote Sensing
View More Questions
Questions Asked in GATE CE exam
- An electricity utility company charges ₹7 per kWh. If a 40-watt desk light is left on for 10 hours each night for 180 days, what would be the cost of energy consumption? If the desk light is on for 2 more hours each night for the 180 days, what would be the percentage-increase in the cost of energy consumption?
- GATE CE - 2025
- Logical and Analytical Reasoning Skills
- During determination of the bulk specific gravity of compacted bituminous specimen, the mass in air of the specimen is 1260 g and volume is 525 cm³. The density of water is 1.0 g/cm³. The theoretical maximum specific gravity of mix is 2.510. The percentage air voids in the compacted specimen is ......... (rounded off to 2 decimal places).
- GATE CE - 2025
- Gravity Dams and Spillways
In levelling between two points A and B on the opposite banks of a river, the readings are taken by setting the instrument both at A and B, as shown in the table. If the RL of A is 150.000 m, the RL of B (in m) is ....... (rounded off to 3 decimal places).
- GATE CE - 2025
- Surveying and Levelling
A one-way, single lane road has traffic that consists of 30% trucks and 70% cars. The speed of trucks (in km/h) is a uniform random variable on the interval (30, 60), and the speed of cars (in km/h) is a uniform random variable on the interval (40, 80). The speed limit on the road is 50 km/h. The percentage of vehicles that exceed the speed limit is ........ (rounded off to 1 decimal place).
- GATE CE - 2025
- Traffic signs
- A 5.0 m wide rectangular channel carries a discharge of 10 m³/s at a depth of 1.5 m under uniform flow. To produce critical flow conditions without affecting the upstream conditions, the channel bottom elevation should be raised (in m) by ........ (rounded off to 2 decimal places).
- GATE CE - 2025
- Microscopic and macroscopic parameters of traffic flow
View More Questions