Question:
Universal Transverse Mercator (UTM) is a
Universal Transverse Mercator (UTM) is a
Updated On: Jul 12, 2024
- conical projection
- azimuthal projection
- polyconic projection
- cylindrical projection
Hide Solution
Verified By Collegedunia
The Correct Option is D
Solution and Explanation
The correct answer is (D) : cylindrical projection
Was this answer helpful?
0
0
Top Questions on Traversing and triangulation survey
- If the number of sides resulting in a closed traverse is increased from three to four, the sum of the interior angles increases by
- GATE CE - 2024
- Geomatics Engineering
- Traversing and triangulation survey
- Which of the following statements is/are CORRECT?
- GATE CE - 2024
- Geomatics Engineering
- Traversing and triangulation survey
- Which of the following statements is/are CORRECT?
- GATE CE - 2024
- Geomatics Engineering
- Traversing and triangulation survey
- Which of the following statements about the Triangulated Irregular Network (TIN) model is/are INCORRECT?
- GATE CE - 2024
- Geomatics Engineering
- Traversing and triangulation survey
Questions Asked in GATE CE exam
- Find the odd one out in the set: {19, 37, 21, 17, 23, 29, 31, 11}
- GATE CE - 2024
- Odd one Out
- A surveyor observes a zenith angle of 93° 00' 00" during a theodolite survey. The corresponding vertical angle is
- GATE CE - 2024
- Principles of surveying
- The initial cost of an equipment is Rs. 1,00,000. Its salvage value at the end of accounting life of 5 years is Rs. 10,000. The difference in depreciation (in Rs.) computed using 'double-declining balance method' and 'straight line method' of depreciation in Year-2 is ____ (in positive integer).
- GATE CE - 2024
- Construction Management
- A 2m × 2m tank of 3 m height has inflow, outflow and stirring mechanisms. Initially, the tank was half-filled with fresh water. At t = 0, an inflow of a salt solution of concentration 5 g/m3 at the rate of 2 litre/s and an outflow of the well stirred mixture at the rate of 1 litre/s are initiated. This process can be modelled using the following differential equation:
\(\frac {dm}{dt}+\frac {m}{6000+t}=0.01\)
where m is the mass (grams) of the salt at time t (seconds). The mass of the salt (in grams) in the tank at 75% of its capacity is _____ (rounded off to 2 decimal places).- GATE CE - 2024
- Properties of Fluids
- An inverted T-shaped concrete beam (B1) in the figure, with centroidal axis X - X, is subjected to an effective prestressing force of 1000 kN acting at the bottom kern point of the beam cross-section. Also consider an identical concrete beam (B2) with the same grade of concrete but without any prestressing force.
- GATE CE - 2024
- Concrete
View More Questions