Step 1: Identify poles.
Denominator is \((z-\tfrac{2}{3})(z-3)\).
Thus poles are:
\[
z = \tfrac{2}{3}, z = 3.
\]
Step 2: Possible ROCs.
- If \(x[n]\) is right-sided, ROC is outside outermost pole: \(|z| > 3\).
- If \(x[n]\) is left-sided, ROC is inside innermost pole: \(|z| < \tfrac{2}{3}\).
- If \(x[n]\) is two-sided, ROC is between the poles: \(\tfrac{2}{3} < |z| < 3\).
Step 3: DTFT condition.
For DTFT to exist, the unit circle \(|z|=1\) must lie within the ROC.
This happens only if:
\[
\tfrac{2}{3} < 1 < 3.
\]
So the ROC must be \(\tfrac{2}{3} < |z| < 3\).
Step 4: Eliminate wrong options.
- (A) \(|z|>3\): unit circle \(|z|=1\) not included. Wrong.
- (C) Left-sided ROC: \(|z|<\tfrac{2}{3}\). Unit circle not included. Wrong.
- (D) Right-sided ROC: \(|z|>3\). Again unit circle not included. Wrong.
Only option (B) satisfies DTFT existence.
Final Answer: \[ \boxed{\tfrac{2}{3} < |z| < 3} \]
A continuous time periodic signal \( x(t) \) is given by: \[ x(t) = 1 + 2\cos(2\pi t) + 2\cos(4\pi t) + 2\cos(6\pi t) \] If \( T \) is the period of \( x(t) \), then evaluate: \[ \frac{1}{T} \int_0^T |x(t)|^2 \, dt \quad {(round off to the nearest integer).} \]
The maximum percentage error in the equivalent resistance of two parallel connected resistors of 100 \( \Omega \) and 900 \( \Omega \), with each having a maximum 5% error, is: \[ {(round off to nearest integer value).} \]
Consider a distribution feeder, with \( R/X \) ratio of 5. At the receiving end, a 350 kVA load is connected. The maximum voltage drop will occur from the sending end to the receiving end, when the power factor of the load is: \[ {(round off to three decimal places).} \]
In the circuit with ideal devices, the power MOSFET is operated with a duty cycle of 0.4 in a switching cycle with \( I = 10 \, {A} \) and \( V = 15 \, {V} \). The power delivered by the current source, in W, is: \[ {(round off to the nearest integer).} \] 
The induced emf in a 3.3 kV, 4-pole, 3-phase star-connected synchronous motor is considered to be equal and in phase with the terminal voltage under no-load condition. On application of a mechanical load, the induced emf phasor is deflected by an angle of \( 2^\circ \) mechanical with respect to the terminal voltage phasor. If the synchronous reactance is \( 2 \, \Omega \), and stator resistance is negligible, then the motor armature current magnitude, in amperes, during loaded condition is closest to: \[ {(round off to two decimal places).} \]