Question:
The yarn manufacturing technology that uses perforated drums for twisting is
The yarn manufacturing technology that uses perforated drums for twisting is
Show Hint
Friction spinning uses perforated drums, and this technology helps produce high-strength yarns with lower cost and better production efficiency.
Updated On: Jan 7, 2026
- Ring spinning
- Rotor spinning
- Friction spinning
- Air-jet spinning
Hide Solution
Verified By Collegedunia
The Correct Option is C
Solution and Explanation
In friction spinning technology, perforated drums are used for twisting the yarn. The yarn is twisted by the friction between the drum and the fiber. This method is commonly used in friction spinning systems to achieve the required twist in the yarn.
Final Answer:
\[
\boxed{\text{(C) Friction spinning}}
\]
Was this answer helpful?
0
0
Top Questions on Principles of spinning processes
- Amongst the following, the correct condition(s) that will reduce bumping during weaving is/are
- GATE TF - 2024
- Textile Engineering and Fibre Science
- Principles of spinning processes
- In melt spinning of a monofilament, a polymer is extruded at a volumetric flow rate of $5\times10^{-5}\ \text{m}^3\!/\text{s}$ through a circular spinneret. The take-up velocity is $100\ \text{m/s}$ with a draw ratio of $50$. The diameter (mm) of the spinneret orifice (rounded off to 2 decimal places) is ______________________________.
- GATE TF - 2023
- Fabric Manufacture, Structure and Properties
- Principles of spinning processes
- In a ring frame, the speeds of traveller at 50 mm bobbin diameter (near the base of the cop) and at 25 mm bobbin diameter (near the tip of the cop) are 13500 rpm and 13400 rpm, respectively. The nominal twist (tpm) (rounded off to 2 decimal places) is ____________________________________.
- GATE TF - 2023
- Fabric Manufacture, Structure and Properties
- Principles of spinning processes
- In wet spinning of acrylic fibres
- GATE TF - 2023
- Fabric Manufacture, Structure and Properties
- Principles of spinning processes
Questions Asked in GATE TF exam
- The twist in a 36 Ne cotton yarn is 15 tpi. The twist multiplier (TM) in cotton system of the yarn (correct to 1 decimal place) is _________.
- GATE TF - 2025
- Yarn Manufacture, Structure and Properties
- A woven fabric has weft yarn of 24 tex and pick density of 25 per cm. It is desired to replace only the weft with a 6 tex yarn of the same packing density. The pick density per cm required to keep the fabric cover the same (answer in integer) is _________.
- GATE TF - 2025
- Yarn Manufacture, Structure and Properties
- The diameter of a fibre is assumed to be a continuous random variable \( X \) with probability density function \[ f(x) = 6x(1 - x), \quad 0<x \leq 1 \] If \( P(X<\beta) = P(X>\beta) \), then the value of \( \beta \) (rounded off to 1 decimal place) is _________.
- GATE TF - 2025
- Probability and Statistics
- If \( P e^x = Q e^{-x} \) for all real values of \( x \), which one of the following statements is true?
Based only on the conversation below, identify the logically correct inference:
“Even if I had known that you were in the hospital, I would not have gone there to see you”, Ramya told Josephine.- GATE CS - 2025
- GATE IN - 2025
- GATE MT - 2025
- GATE NM - 2025
- GATE TF - 2025
- Logical and Analytical Reasoning Skills
View More Questions