Question:
The relationship between Young's modulus $Y$, bulk modulus $K$ and modulus of rigidity $\eta$ is
The relationship between Young's modulus $Y$, bulk modulus $K$ and modulus of rigidity $\eta$ is
Updated On: Jul 2, 2022
- $\Upsilon=\frac{9\eta\,K}{\eta+3K}$
- $\eta=\frac{9\Upsilon\,K}{\Upsilon+3K}$
- $\Upsilon=\frac{9\eta\,K}{3\eta+K}$
- $\Upsilon=\frac{3\eta\,K}{9\eta+K}$
Hide Solution
Verified By Collegedunia
The Correct Option is A
Solution and Explanation
$\frac{9}{\Upsilon}=\frac{3}{\eta}+\frac{1}{K}$
$\frac{9}{\Upsilon}=\frac{3K+\eta}{K \eta} ; $
$\Upsilon =\frac{9K\eta}{3K+\eta}$
Was this answer helpful?
0
0
Top Questions on mechanical properties of solids
A wire of uniform resistance \(\lambda\) \(\Omega\)/m is bent into a circle of radius r and another piece of wire with length 2r is connected between points A and B (ACB) as shown in figure. The equivalent resistance between points A and B is_______ \(\Omega\).
- JEE Main - 2026
- Physics
- mechanical properties of solids
- Two wires \(A\) and \(B\) made of different materials have lengths \(6.0\) cm and \(5.4\) cm, and areas of cross-sections \(3.0\times10^{-5}\,\text{m}^2\) and \(4.5\times10^{-5}\,\text{m}^2\), respectively. They are stretched by the same magnitude under the same load. If the ratio of Young’s modulus of \(A\) to that of \(B\) is \(x:3\), find the value of \(x\).
- JEE Main - 2026
- Physics
- mechanical properties of solids
- Two wires of cross sectional area \(1 \text{ cm}^2\) and \(2 \text{ cm}^2\) and lengths 20 cm and 30 cm are connected to the same load. If their extensions are same, find the ratio of their Young's modulus :
- JEE Main - 2026
- Physics
- mechanical properties of solids
- Figure beside represents strain versus stress graph for four materials $A, B, C$ and $D$. Which material has maximum Young's modulus?
- JEE Main - 2026
- Physics
- mechanical properties of solids
The stress v/s strain graph of a material is as shown. Find the Young's modulus of the material.
- JEE Main - 2026
- Physics
- mechanical properties of solids
View More Questions
Concepts Used:
Mechanical Properties of Solids
Mechanical properties of solids intricate the characteristics such as the resistance to deformation and their strength. Strength is the ability of an object to resist the applied stress, to what extent can it bear the stress.
Therefore, some of the mechanical properties of solids involve:
- Elasticity: When an object is stretched, it changes its shape and when we leave, it retrieves its shape. Or we can say it is the property of retrieving the original shape once the external force is removed. For example Spring
- Plasticity: When an object changes its shape and never attains its original shape even when an external force is removed. It is the permanent deformation property. For example Plastic materials.
- Ductility: When an object is been pulled in thin sheets, wires or plates, it will be assumed that it has ductile properties. It is the property of drawing into thin wires/sheets/plates. For example Gold or Silver
- Strength: The ability to hold out applied stress without failure. Many types of objects have higher strength than others.