Question:
The network shown below has a resonant frequency of 150 kHz and a bandwidth of 600 Hz. The Q-factor of the network is _________. (round off to nearest integer)
The network shown below has a resonant frequency of 150 kHz and a bandwidth of 600 Hz. The Q-factor of the network is _________. (round off to nearest integer)
Show Hint
The Q-factor is a measure of the selectivity of a resonant circuit. It is inversely proportional to the bandwidth.
Updated On: Nov 27, 2025
Hide Solution
Verified By Collegedunia
Correct Answer: 250
Solution and Explanation
The formula for the Q-factor of a resonant circuit is given by:
\[
Q = \frac{f_0}{\Delta f}
\]
where \( f_0 \) is the resonant frequency and \( \Delta f \) is the bandwidth.
Given that: \[ f_0 = 150 \, \text{kHz}, \quad \Delta f = 600 \, \text{Hz} \] Substituting the values into the formula: \[ Q = \frac{150000}{600} = 250 \] Thus, the Q-factor of the network is \( 250 \).
Given that: \[ f_0 = 150 \, \text{kHz}, \quad \Delta f = 600 \, \text{Hz} \] Substituting the values into the formula: \[ Q = \frac{150000}{600} = 250 \] Thus, the Q-factor of the network is \( 250 \).
Was this answer helpful?
0
0
Top Questions on Network Analysis
- What will be the stability for the following transfer function?
\( G(s) = \frac{50}{s(s+5)} \) 
Find the values of $V_{Th}$ & $R_{Th}$ in the given circuit.
- Which of the following is the Laplace equation?
- A phase lag-lead network introduces in the output_______.
View More Questions
Questions Asked in GATE EE exam
- A 3-phase, 400 V, 4 pole, 50 Hz star-connected induction motor has the following parameters referred to stator: \[ R'_1 = 1 \, \text{ohm}, \, X_s = X'_1 = 2 \, \text{ohm} \] Stator resistance, magnetizing reactance, and core loss of the motor are neglected. The motor is run with constant \( v/f \) control. The output frequency from the drive is closest to:
- GATE EE - 2025
- Transient and Steady‐state analysis of linear time invariant systems
In the Wheatstone bridge shown below, the sensitivity of the bridge in terms of change in balancing voltage \( E \) for unit change in the resistance \( R \), in V/Ω, is __________ (round off to two decimal places).
- GATE EE - 2025
- Electrical Energy, Power
- A DC series motor with negligible series resistance is running at a certain speed driving a load, where the load torque varies as the cube of the speed. The motor is fed from a 400 V DC source and draws 40 A armature current. Assume a linear magnetic circuit. The external resistance in ohms that must be connected in series with the armature to reduce the speed of the motor by half is closest to:
- GATE EE - 2025
- Instrument transformers
- The input voltage \( v(t) \) and current \( i(t) \) of a converter are given by, \[ v(t) = 300 \sin(\omega t) \, {V} \] \[ i(t) = 10 \sin\left(\omega t - \frac{\pi}{6}\right) + 2 \sin\left(3\omega t + \frac{\pi}{6}\right) + \sin\left(5\omega t + \frac{\pi}{2}\right) \, {A} \] where \( \omega = 2\pi \times 50 \) rad/s. The input power factor of the converter is closest to:
- Instrument(s) required to synchronize an alternator to the grid is/are:
- GATE EE - 2025
- Electrical Energy, Power
View More Questions