Seasoning of timber for use in construction is done essentially to
Show Hint
- increase strength and durability
- smoothen timber surfaces
- remove knots from timber logs
- cut timber in right season and geometry
The Correct Option is A
Solution and Explanation
Final Answer: increase strength and durability
Top Questions on Construction Materials
- Which of the following are the basic ingredients for the concrete mixture?
- CUET (PG) - 2025
- Plastic Arts
- Construction Materials
- What is the hardening time of the cement?
- CUET (PG) - 2025
- Plastic Arts
- Construction Materials
The bulking of the sand is increased in volume from 20% to 40% of various sand and moisture content ranges from ……… to ……….. percent.
- TANCET - 2024
- Civil Engineering
- Construction Materials
- Wrought iron contains carbon up to
- TS PGECET - 2024
- Civil Engineering
- Construction Materials
- Age of a tree may be ascertained by
- TS PGECET - 2024
- Civil Engineering
- Construction Materials
Questions Asked in GATE CE exam
Consider a reinforced concrete beam section of 350 mm width and 600 mm depth. The beam is reinforced with the tension steel of 800 mm\(^2\) area at an effective cover of 40 mm. Consider M20 concrete and Fe415 steel. Let the stress block considered for concrete in IS 456:2000 be replaced by an equivalent rectangular stress block, with no change in (a) the area of the stress block, (b) the design strength of concrete (at the strain of 0.0035), and (c) the location of neutral axis at flexural collapse.
The ultimate moment of resistance of the beam (in kN.m) is ___________ (round off to the nearest integer).
- GATE CE - 2025
- Concrete
Two soils of permeabilities \( k_1 \) and \( k_2 \) are placed in a horizontal flow apparatus, as shown in the figure. For Soil 1, \( L_1 = 50 \, {cm} \), and \( k_1 = 0.055 \, {cm/s} \); for Soil 2, \( L_2 = 30 \, {cm} \), and \( k_2 = 0.035 \, {cm/s} \). The cross-sectional area of the horizontal pipe is 100 cm², and the head difference (\( \Delta h \)) is 150 cm. The discharge (in cm³/s) through the soils is ........ (rounded off to 2 decimal places).
- GATE CE - 2025
- Permeability
The most suitable test for measuring the permeability of clayey soils in the laboratory is ___________.
- GATE CE - 2025
- Permeability
- The sum of the following infinite series is: \[ \frac{1}{1!} + \frac{1}{2!} + \frac{1}{3!} + \frac{1}{4!} + \frac{1}{5!} + \dots \]
- GATE CE - 2025
- Mathematical Logic
Consider the beam ACDEB given in the figure. Which of the following statements is/are correct:
- GATE CE - 2025
- Shear Force