Newton's law of cooling holds good only, if the temperature difference between the body and the surroundings is
- less than 10$^{\circ}$C
- more than 10$^{\circ}$C
- less than 100$^{\circ}$C
- more than 100$^{\circ}$C
The Correct Option is A
Solution and Explanation
Top Questions on thermal properties of matter
A metal plate of area 10-2m2 rests on a layer of castor oil, 2 × 10-3m thick, whose viscosity coefficient is 1.55 Ns/m2. The approximate horizontal force required to move the plate with a uniform speed of 3 × 10-2ms-1 is:
- WBJEE - 2024
- Physics
- thermal properties of matter
- When a light ray incidents on the surface of a medium, the reflected ray is completely polarized. Then the angle between reflected and refracted rays is:
- BITSAT - 2024
- Physics
- thermal properties of matter
- In YDSE, monochromatic light falls on a screen 1.80 m from two slits separated by 2.08 mm. The first and second order bright fringes are separated by 0.553 mm. The wavelength of light used is:
- BITSAT - 2024
- Physics
- thermal properties of matter
- If the distance between an object and its two times magnified virtual image produced by a curved mirror is 15 cm, the focal length of the mirror must be:
- BITSAT - 2024
- Physics
- thermal properties of matter
- A microwave of wavelength 2.0 cm falls normally on a slit of width 4.0 cm. The angular spread of the central maxima of the diffraction pattern obtained on a screen 1.5 m away from the slit will be:
- BITSAT - 2024
- Physics
- thermal properties of matter
Questions Asked in MHT CET exam
- Force between two point charges \( q_1 \) and \( q_2 \) placed in vacuum at a distance \( r \, \text{cm} \) apart is \( F \). Force between them when placed in a medium having dielectric \( K = 5 \) at \( r/5 \, \text{cm} \) apart will be:
- MHT CET - 2024
- VITEEE - 2024
- Electric Charge
- What is the oxidation state of Fe in \( \mathrm{Fe_3O_4} \)?
- MHT CET - 2024
- States of matter
- The number of ways of distributing \( 500 \) dissimilar boxes equally among \( 50 \) persons is
- MHT CET - 2024
- Permutations
- A committee of 11 members is to be formed out of 8 males and 5 females. If \( m \) is the number of ways the committee is formed with at least 6 males and \( n \) is the number of ways with at least 3 females, then:
- MHT CET - 2024
- Combinations
- Two monkeys off mass 10 kg and 8 kg are moving along a vertical light rope the former climbing up with an acceleration of 2 m/second square while the latter coming down with a uniform velocity of 2 m/sec square find the tension in the rope at the fixed support
- MHT CET - 2024
- tension
Concepts Used:
Thermal Properties of Matter
Anything that has mass or occupies space in the universe is commonly known as matter. There are five properties of matters namely chemical, mechanical, thermal, dimensional, and physical properties.
Read More: Thermal Properties of Matter
Heat Capacity:
The quantity of heat needed to change the temperature of the matter by 1° is known as the heat capacity of a material. The temperature is indicated in kelvin or Celsius and the amount of heat is shown in calories or joules. Specific heat capacity or molar heat capacity is used to calculate the heat capacity of the matter with the stated dimension.
Linear expansion is the situation when change takes place in one dimension or dimensional.
Thermal Expansion:
When heat is passed through the material, the change in the area, volume, and shape is recognized as the thermal expansion property of the material. The expansion of the railway tracks due to maximal heat which leads to accidents is an example of thermal expansion.
Thermal Conductivity:
This property is interconnected to the conductivity of heat. The amount of heat regulated by the material is directly proportional to the conductivity of the material. Not all objects have the capacity to conduct heat throughout their bodies. Insulators are such objects which do not have the property to conduct heat throughout their body.
Thermal Stress:
The stress due to thermal contraction or expansion of the body is known as thermal stress. The explosion of materials takes place due to thermal stress which is dangerous. The cracks on the truck tyres are caused by an outcome of thermal stress. Trucks at high speed generate heat which is caused by the friction of the truck tyres and the road surface.