Question:
If ‘→’ denotes increasing order of intensity, then the meaning of the words [talk → shout → scream] is analogous to [please → \_\_\_\_\_ → pander]. Which one of the given options is appropriate to fill the blank?
If ‘→’ denotes increasing order of intensity, then the meaning of the words [talk → shout → scream] is analogous to [please → \_\_\_\_\_ → pander]. Which one of the given options is appropriate to fill the blank?
Show Hint
Semantically, "flatter" aligns with the increasing intensity in the context.
Updated On: Jan 23, 2025
- flatter
- flutter
- fritter
- frizzle
Hide Solution
Verified By Collegedunia
The Correct Option is A
Solution and Explanation
Step 1: Analyzing the given pattern.
If → denotes increasing order of intensity:
\[
\text{[Talk → Shout → Scream]}
\]
The analogous pattern is:
\[
\text{[Please → \_\_\_\_\_ → Pander]}
\]
Step 2: Evaluating options.
Option (1) flatter: To praise someone to make them feel attractive or important. This matches the intensity increase.
Option (2) flutter: To move quickly and lightly, unrelated to the context.
Option (3) fritter: To waste time or resources, not suitable.
Option (4) frizzle: To make something crisp or burn lightly, unrelated.
Hence, the correct option is (1) flatter.
Option (1) flatter: To praise someone to make them feel attractive or important. This matches the intensity increase.
Option (2) flutter: To move quickly and lightly, unrelated to the context.
Option (3) fritter: To waste time or resources, not suitable.
Option (4) frizzle: To make something crisp or burn lightly, unrelated.
Hence, the correct option is (1) flatter.
Was this answer helpful?
0
0
Top Questions on Sequence and Series
- If two distinct non-zero real variables \( x \) and \( y \) are such that \( (x + y) \) is proportional to \( (x - y) \), then the value of \( \frac{x}{y} \) is:
- GATE CS - 2024
- General Aptitude
- Sequence and Series
- Given an input line of numbers and words, a machine rearranges them following particular rule in each step. Here is an illustration of an input and rearrangement sequence (Step 1 to Step 5) :
Input: 61 wb ob 48 45 29 34 sb pb lb
Step 1: lb wb ob 48 45 29 34 sb pb 61
Step 2: lb ob wb 45 29 34 sb pb 61 48
Step 3: lb ob pb wb 29 34 sb 61 48 45
Step 4: lb ob pb sb wb 29 61 48 45 34
Step 5: lb ob pb sb wb 61 48 45 34 29
Step 5 is the last step of the above arrangement.
Based on the rules followed in the above steps, answer the following question :
Input: cb kb eb 58 49 23 38 jb nb gb 69 82
Which of the following represents the position of 58 in the fourth step? (Step-5 is the last step of the arrangement.)- GATE XH-C1 - 2024
- General Aptitude
- Sequence and Series
- Consider the sequence\( t_1 = 1, t_2 = -1 and t_n = \left( \frac{n-3}{n-1} \right) t_{n-2} for n \ge 3. \)Then, the value of the sum \(\frac{1}{t_2}\) + \(\frac{1}{t_4}\) + \(\frac{1}{t_6}\) + ……. + \(\frac{1}{t_{2022}}\) + \(\frac{1}{t_{2024}}\), is
- CAT - 2024
- Quantitative Aptitude
- Sequence and Series
- The sum of the infinite series \( \frac{1}{5} \left( \frac{1}{5} - \frac{1}{7} \right) + \left( \frac{1}{5} \right)^2 \left( \frac{1}{5} - \frac{1}{7} \right)^2 - \left( \frac{1}{7} \right)^2 + \left( \frac{1}{5} \right)^3 \left( \frac{1}{5} - \frac{1}{7} \right)^3 + \dots \) is equal to
- CAT - 2024
- Quantitative Aptitude
- Sequence and Series
- A shopkeeper sells half of the grains plus \(3 \, \text{kg}\) of grains to Customer 1, and then sells another half of the remaining grains plus \(3 \, \text{kg}\) to Customer 2. When the 3rd customer arrives, there are no grains left. Find the total grains that were initially present.
- CAT - 2024
- Quantitative Aptitude
- Sequence and Series
View More Questions
Questions Asked in GATE EE exam
- A single-phase full bridge voltage source inverter (VSI) feeds a purely inductive load. The inverter output voltage is a square wave in \( 180^\circ \) conduction mode. The fundamental frequency of the output voltage is \( 50 \, \text{Hz} \). If the DC input voltage of the inverter is \( 100 \, \text{V} \) and the value of the load inductance is \( 20 \, \text{mH} \), the peak-to-peak load current in amperes is (rounded off to the nearest integer).
- A single-phase half-controlled bridge converter supplies an inductive load with ripple-free load current. The triggering angle of the converter is \( 60^\circ \). The ratio of the rms value of the fundamental component of the input current to the rms value of the total input current of the bridge is (rounded off to 3 decimal places).
- GATE EE - 2024
- Current
- A single-phase full-controlled thyristor converter bridge is used for regenerative braking of a separately excited DC motor with the following specifications: Rated armature voltage = \( 210 \, \text{V} \), Rated armature current = \( 10 \, \text{A} \), Rated speed = \( 1200 \, \text{rpm} \), Armature resistance = \( 1 \, \Omega \), Input to the converter bridge = \( 240 \, \text{V at 50 Hz} \). Assume that the motor is running at \( 600 \, \text{rpm} \) and the armature terminals of the motor are suitably reversed for regenerative braking. If the armature current of the motor is to be maintained at the rated value, the triggering angle of the converter bridge in degrees should be (rounded off to 2 decimal places).
\begin{tabular}{|l|l|} \hline Parameter & Value
\hline Rated armature voltage & 210 V
\hline Rated armature current & 10 A
\hline Rated speed & 1200 rpm
\hline Armature resistance & 1 $\Omega$
\hline Input to the converter bridge & 240 V at 50 Hz
\hline \end{tabular}
The armature of the DC motor is fed from the fullcontrolled bridge and the field current is kept constant.- GATE EE - 2024
- Current
- In the DC-DC converter shown in the figure, the current through the inductor is continuous. The switching frequency is \( 500 \, \text{Hz} \). The voltage (\( V_o \)) across the load is assumed to be constant and ripple-free. The peak inductor current in amperes is (rounded off to the nearest integer).
\includegraphics[width=0.5\linewidth]{64.png}- GATE EE - 2024
- Current
- A difference amplifier is shown in the figure. Assume the op-amp to be ideal. The CMRR (in dB) of the difference amplifier is (rounded off to 2 decimal places).
\includegraphics[width=0.5\linewidth]{61.png}- GATE EE - 2024
- Current
View More Questions