Question:
If compressibility of material is \(4×10^{-5}\) per atm, pressure is 100 atm and volume is 100 cm3, then find △V=?
If compressibility of material is \(4×10^{-5}\) per atm, pressure is 100 atm and volume is 100 cm3, then find △V=?
Updated On: Jun 25, 2024
- 0.4 cm3
- 0.8 cm3
- 0.6 cm3
- 0.2 cm3
Hide Solution
Verified By Collegedunia
The Correct Option is A
Solution and Explanation
The correct option is (A): 0.4 cm3.
Was this answer helpful?
0
0
Top Questions on mechanical properties of solids
- Match List-I with List-II :
List-I List-II (A) A force that restores an elastic body of unit area to its original state (I) Bulk modulus (B) Two equal and opposite forces parallel to opposite faces (IV) Shear modulus (C) Forces perpendicular everywhere to the surface per unit area same everywhere (III) Stress (D) Two equal and opposite forces perpendicular to opposite faces (II) Young's modulus
Choose the correct answer from the options given below :- JEE Main - 2024
- Physics
- mechanical properties of solids
- A plane electromagnetic wave of frequency 35 MHz travels in free space along the X-direction. At a particular point (in space and time), \( \vec{E} = 9.6 \hat{j} \, \text{V/m} \). The value of the magnetic field at this point is:
- JEE Main - 2024
- Physics
- mechanical properties of solids
- A wire of length L and radius r is clamped at one end. If its other end is pulled by a force F, its length increases by l. If the radius of the wire and the applied force both are reduced to half of their original values keeping original length constant, the increase in length will become.
- JEE Main - 2024
- Physics
- mechanical properties of solids
- Each of three blocks \( P \), \( Q \), and \( R \) shown in the figure has a mass of 3 kg. Each of the wires \( A \) and \( B \) has a cross-sectional area of 0.005 cm\(^2\) and Young's modulus \( 2 \times 10^{11} \, \text{N} \, \text{m}^{-2} \). Neglecting friction, the longitudinal strain on wire \( B \) is \( \ldots \times 10^{-4} \). (Take \( g = 10 \, \text{m/s}^2 \))
- JEE Main - 2024
- Physics
- mechanical properties of solids
- Two metallic wires \( P \) and \( Q \) have the same volume and are made of the same material. If their areas of cross-section are in the ratio \( 4 : 1 \) and a force \( F_1 \) is applied to \( P \), producing an extension of \( \Delta l \), the force required to produce the same extension in \( Q \) is \( F_2 \).The value of \( \frac{F_1}{F_2} \) is _______.
- JEE Main - 2024
- Physics
- mechanical properties of solids
View More Questions
Questions Asked in JIPMER MBBS exam
- If same charge q is placed inside a sphere and cube having radius 1m and side 2m respectively. What will be the ratio of flux passing through them ?
- JIPMER MBBS - 2019
- Electric Flux
- \(BrO^{3-}\) Changes into \(Br_2\) in an acidic medium of a unbalanced equation how many electron should be present on the balanced electron.
- JIPMER MBBS - 2019
- Balancing a redox reaction
- If resistivity of copper is \(1.72×10^{-8} \Omega-m\) and number of free electron in copper is \(8.5×10^{28} / m^3\). Find mobility
- JIPMER MBBS - 2019
- Resistance and Resistivity
- If equilibrium constant is 2.6×108 then find the value of ΔG°.
- JIPMER MBBS - 2019
- Thermodynamics
- Level of LH is maximum :
- JIPMER MBBS - 2019
- Hormones
View More Questions