Question:
Digital circuit can be made by repetitive use of
Digital circuit can be made by repetitive use of
Updated On: Jun 5, 2023
- OR gates
- AND gates
- NOT gates
- NAND gates.
Hide Solution
Verified By Collegedunia
The Correct Option is C
Approach Solution - 1
NAND gate can be repeatedly used for the purpose`
Was this answer helpful?
0
0
Hide Solution
Verified By Collegedunia
Approach Solution -2
The NAND and NOR gates are universal gates because they may be combined to perform any of the fundamental functions and so construct an inverter, an OR gate, or an AND gate. Non-inverting gates lack this flexibility since they cannot create an inversion.
Because the NAND gate is known as a universal gate, any digital circuit may be created by making suitable repeated use of the NAND gate.
Because the NAND gate is known as a universal gate, any digital circuit may be created by making suitable repeated use of the NAND gate.
Was this answer helpful?
0
0
Hide Solution
Verified By Collegedunia
Approach Solution -3
We know the repetitive use of NAND and NOR gate gives digital circuits.
Was this answer helpful?
0
0
Top Questions on Semiconductor electronics: materials, devices and simple circuits
- The range of electrical conductivity \( \sigma \) and resistivity \( \rho \) for metals, among the following, is:
- KCET - 2025
- Physics
- Semiconductor electronics: materials, devices and simple circuits
- The reverse saturation current (I0) of a silicon diode at 27°C is \( 10^{-6} \) A. What will be the approximate value of I0 at 67°C? (Assume \( I_0 \) doubles for every 10°C rise in temperature)
- MHT CET - 2025
- Physics
- Semiconductor electronics: materials, devices and simple circuits
- In a silicon semiconductor at room temperature, the intrinsic carrier concentration is \( 1.5 \times 10^{16} \, \text{m}^{-3} \). Calculate the energy band gap of the silicon if the intrinsic carrier concentration is given by: \[ n_i = \sqrt{N_c N_v} e^{-E_g / 2kT} \] Where: - \( N_c = 2.8 \times 10^{25} \, \text{m}^{-3} \) is the effective density of states in the conduction band, - \( N_v = 1.04 \times 10^{25} \, \text{m}^{-3} \) is the effective density of states in the valence band, - \( k = 1.38 \times 10^{-23} \, \text{J/K} \) is the Boltzmann constant, - \( T = 300 \, \text{K} \) is the temperature.
- MHT CET - 2025
- Physics
- Semiconductor electronics: materials, devices and simple circuits
- In a p-n junction diode, what happens to the width of the depletion region when the forward bias is increased?
- MHT CET - 2025
- Physics
- Semiconductor electronics: materials, devices and simple circuits
Sliding contact of a potentiometer is in the middle of the potentiometer wire having resistance \( R_p = 1 \, \Omega \) as shown in the figure. An external resistance of \( R_e = 2 \, \Omega \) is connected via the sliding contact.
The current \( i \) is :
- JEE Main - 2025
- Physics
- Semiconductor electronics: materials, devices and simple circuits
View More Questions
Notes on Semiconductor electronics: materials, devices and simple circuits
Concepts Used:
Semiconductors
Semiconductors are a crystalline solid materials, whose electrical conductivity lies between a conductor and an insulator. Semiconductors are mainly used in the manufacturing of electronic devices like capacitors, transistors, diodes, Integrated circuits, etc.
Properties of Semiconductor:
- Semiconductor acts like an insulator at Zero Kelvin. On increasing the temperature, it works as a conductor.
- Due to their exceptional electrical properties, semiconductors can be modified by doping to make semiconductor devices suitable for energy conversion, switches, and amplifiers.
- Lesser power losses.
Uses of Semiconductor:
- Semiconductors are widely used in manufacturing electronics devices like transistors, diodes, sensors, integrated circuits.
- Semiconductors are widely used in all electronic devices, like mobile phones, digital cameras, communication devices, trains, ATMs, etc.