Question:
De-stripping in radiometric correction is used to correct a type of
De-stripping in radiometric correction is used to correct a type of
Updated On: Jul 12, 2024
- sensor defect
- atmospheric effect
- path radiance
- geometric error
Hide Solution
Verified By Collegedunia
The Correct Option is A
Solution and Explanation
The correct answer is (A) : sensor defect
Was this answer helpful?
0
0
Top Questions on Errors and their adjustment
- The Representative Fraction (RF) of the graphical scale given below is 1/X, where X is _______(in integer).
- GATE CE - 2024
- Geomatics Engineering
- Errors and their adjustment
- The standard error of a unit weight for a set of angle observations is 10". The minimum number of observations required to reduce the standard error of the mean for this set of observations to 2" is ______ (in integer).
- GATE CE - 2024
- Geomatics Engineering
- Errors and their adjustment
- Identify the type of digitizing error in the following figure.
- GATE CE - 2024
- Geomatics Engineering
- Errors and their adjustment
- Which of the following options describes the CORRECT relationship for a Gaussian distributed random error?
- GATE CE - 2024
- Geomatics Engineering
- Errors and their adjustment
- Which of the following options best describes the "uncertainty" in a measurement?
- GATE CE - 2024
- Geomatics Engineering
- Errors and their adjustment
View More Questions
Questions Asked in GATE CE exam
- Find the odd one out in the set: {19, 37, 21, 17, 23, 29, 31, 11}
- GATE CE - 2024
- Odd one Out
- A surveyor observes a zenith angle of 93° 00' 00" during a theodolite survey. The corresponding vertical angle is
- GATE CE - 2024
- Principles of surveying
- The initial cost of an equipment is Rs. 1,00,000. Its salvage value at the end of accounting life of 5 years is Rs. 10,000. The difference in depreciation (in Rs.) computed using 'double-declining balance method' and 'straight line method' of depreciation in Year-2 is ____ (in positive integer).
- GATE CE - 2024
- Construction Management
- A 2m × 2m tank of 3 m height has inflow, outflow and stirring mechanisms. Initially, the tank was half-filled with fresh water. At t = 0, an inflow of a salt solution of concentration 5 g/m3 at the rate of 2 litre/s and an outflow of the well stirred mixture at the rate of 1 litre/s are initiated. This process can be modelled using the following differential equation:
\(\frac {dm}{dt}+\frac {m}{6000+t}=0.01\)
where m is the mass (grams) of the salt at time t (seconds). The mass of the salt (in grams) in the tank at 75% of its capacity is _____ (rounded off to 2 decimal places).- GATE CE - 2024
- Properties of Fluids
- An inverted T-shaped concrete beam (B1) in the figure, with centroidal axis X - X, is subjected to an effective prestressing force of 1000 kN acting at the bottom kern point of the beam cross-section. Also consider an identical concrete beam (B2) with the same grade of concrete but without any prestressing force.
- GATE CE - 2024
- Concrete
View More Questions