Question:
Consider the statements P, Q, and R.
P : Compacted fine-grained soils with flocculated structure have isotropic permeability.
Q : Phreatic surface/line is the line along which the pore water pressure is always maximum.
R : The piping phenomenon occurring below the dam foundation is typically known as blowout piping.
Which of the following option(s) is/are CORRECT ?
Consider the statements P, Q, and R.
P : Compacted fine-grained soils with flocculated structure have isotropic permeability.
Q : Phreatic surface/line is the line along which the pore water pressure is always maximum.
R : The piping phenomenon occurring below the dam foundation is typically known as blowout piping.
Which of the following option(s) is/are CORRECT ?
P : Compacted fine-grained soils with flocculated structure have isotropic permeability.
Q : Phreatic surface/line is the line along which the pore water pressure is always maximum.
R : The piping phenomenon occurring below the dam foundation is typically known as blowout piping.
Which of the following option(s) is/are CORRECT ?
Updated On: Jul 18, 2024
- Both P and R are TRUE
- P is FALSE and Q is TRUE
- P is TRUE and R is FALSE
- Both Q and R are FALSE
Hide Solution
Verified By Collegedunia
The Correct Option is C, D
Solution and Explanation
The correct option is (C) : P is TRUE and R is FALSE and (D) : Both Q and R are FALSE.
Was this answer helpful?
0
0
Top Questions on Pipe networks
- A 2 m × 1.5 m tank of 6 m height is provided with a 100 mm diameter orifice at the center of its base. The orifice is plugged and the tank is filled up to 5 m height. Consider the average value of discharge coefficient as 0.6 and acceleration due to gravity (g) as 10 m/s2. After unplugging the orifice, the time (in seconds) taken for the water level to drop from 5 m to 3.5 m under free discharge condition is _________ (rounded off to 2 decimal places).
- A 500 m long water distribution pipeline P with diameter 1.0 m, is used to convey 0.1 m3/s of flow. A new pipeline Q, with the same length and flow rate, is to replace P. The friction factors for P and Q are 0.04 and 0.01, respectively. The diameter of the pipeline Q (in meters) is ______ (rounded off to 2 decimal places).
Questions Asked in GATE CE exam
- Eigenvalue question: \[\begin{pmatrix} 6 & 8 \\ 4 & 2 \end{pmatrix} \quad \text{Eigenvalue options:} \quad \text{(i) 1, (ii) 2, (iii) 3, (iv) 4}\]
- GATE CE - 2025
- Linear Algebra
- Given the matrix equation: \[A = \begin{pmatrix} 2 & 3 & 4 \\ 1 & 4 & 5 \\ 4 & 3 & 2 \end{pmatrix} \quad A \cdot X = B\]
Where \( A \) is the matrix, \( X \) is the unknown vector, and \( B \) is a constant vector. Solve for \( X \).- GATE CE - 2025
- Linear Algebra
- Given the following conditions, determine the value of the 15-minute Peak Hourly Factor (PHF): Given:
- Vehicles in the peak hour come in 10-minute intervals
- Find the value of the 15-minute PHF- GATE CE - 2025
- Concept of airport runway length
- Runway length after elevation and temperature correction is 700 m. The effective gradient is 1%. Find the final corrected length.
- GATE CE - 2025
- Concept of airport runway length
- Solve the cubic equation: \[ x^3 - \frac{15}{2} x^2 + 18x + 20 = 0 \]
- GATE CE - 2025
- Algebra
View More Questions