Question

Consider a reinforced concrete beam section of 300 mm width and 700 mm depth. The beam is reinforced with the tension steel of 2000 mm² area at an effective cover of 50 mm. Concrete in the tension zone is assumed to be cracked. Assume the modular ratio of 12 and Young's modulus of 200 GPa for steel. When the extreme fibre in the compression zone undergoes the strain of 0.0004 due to the applied bending moment, the stress in the steel (in MPa) is ..... (rounded off to the nearest integer).

Hint:

When solving for stress in reinforced concrete beams, remember to use the strain values derived from the bending moment and the modular ratio to compute the stress in steel.

Answer 1

Correct Answer: 125

Modular ratio, \( m = 12 \) \quad and \quad \( E_s = 200 \, {GPa} \)
Actual depth of NA: \[ {BX}^2 / 2 = mA_{st}(d - x_a) \] where \( A_{st} = 2000 \, {mm}^2 \), \( d = 650 \, {mm} \), and \( x_a \) is the actual depth of the neutral axis.
\[ 300 \times x_a^2 / 2 = 12 \times 2000 \times (650 - x_a) \] \[ 150 \times x_a^2 + 12 \times 2000 \times x_a - 12 \times 2000 \times 650 = 0 \] \[ x_a = 252.26 \, {mm} \] Now, from the strain diagram, we have: \[ \epsilon_{st} = \frac{0.0004(650 - 252.26)}{252.26} = 6.306 \times 10^{-4} \] Stress in steel: \[ \sigma_{st} = \epsilon_{st} \times E_s = 6.306 \times 10^{-4} \times 200 \times 10^3 = 126.136 \, {N/mm}^2 \approx 126 \, {MPa}. \] Correct Answer: 126 MPa (rounded to the nearest integer).