Question:
Consider a digital display system (DDS) shown in the figure that displays the contents of register X. A 16-bit code word is used to load a word in X, either from S or from R. S is a 1024-word memory segment and R is a 32-word register file. Based on the value of mode bit M, T selects an input word to load in X. P and Q interface with the corresponding bits in the code word to choose the addressed word. Which one of the following represents the functionality of P, Q, and T?
\includegraphics[width=0.5\linewidth]{image40.png}
Consider a digital display system (DDS) shown in the figure that displays the contents of register X. A 16-bit code word is used to load a word in X, either from S or from R. S is a 1024-word memory segment and R is a 32-word register file. Based on the value of mode bit M, T selects an input word to load in X. P and Q interface with the corresponding bits in the code word to choose the addressed word. Which one of the following represents the functionality of P, Q, and T?
\includegraphics[width=0.5\linewidth]{image40.png}
Show Hint
Decoders are used to select specific words or registers based on the address. Multiplexers are used for selecting between two options, typically controlled by a selection bit.
Updated On: Jan 11, 2026
- P is 10:1 multiplexer; Q is 5:1 multiplexer; T is 2:1 multiplexer
- P is \( 10^{10} \) decoder; Q is \( 5 \times 25^5 \) decoder; T is 2:1 encoder
- P is \( 10^{10} \) decoder; Q is \( 5 \times 25^5 \) decoder; T is 2:1 multiplexer
- P is 1:10 de-multiplexer; Q is 1:5 de-multiplexer; T is 2:1 multiplexer
Hide Solution
Verified By Collegedunia
The Correct Option is C
Solution and Explanation
From the diagram and the explanation in the problem, we have:
- P: The S-address requires a decoder to address one of the 1024 words, which can be done using a \( 10^{10} \) decoder, since \( 2^{10} = 1024 \).
- Q: The R-address is from a 32-word register file. A decoder is used to choose one of the 32 registers, so Q is a \( 5 \times 25^5 \) decoder since \( 2^5 = 32 \).
- T: The T block functions as a 2:1 multiplexer, based on the value of the mode bit \( M \), selecting either from the register or memory.
Thus, the correct answer is (C).
Was this answer helpful?
0
0
Top Questions on Combinational and Sequential Circuits
Consider the following logic circuit diagram.
- GATE CS - 2025
- Digital Logic
- Combinational and Sequential Circuits
Consider a 3-bit counter, designed using T flip-flops, as shown below. Assuming the initial state of the counter given by $PQR$ as $000$, what are the next three states?
- GATE CS - 2021
- Digital Logic
- Combinational and Sequential Circuits
Which one of the following circuits implements the Boolean function given below?
\[ f(x,y,z) = m_0 + m_1 + m_3 + m_4 + m_5 + m_6, \] where \(m_i\) is the \(i^{\text{th}}\) minterm.
- GATE CS - 2021
- Digital Logic
- Combinational and Sequential Circuits
- Suppose we want to design a synchronous circuit that processes a string of 0's and 1's. Given a string, it produces another string by replacing the first 1 in any subsequence of consecutive 1's by a 0. Consider the following example.
Input sequence: 00100011000011100
Output sequence: 00000001000001100
A Mealy Machine is a state machine where both the next state and the output are functions of the present state and the current input. The above mentioned circuit can be designed as a two-state Mealy machine. The states in the Mealy machine can be represented using Boolean values 0 and 1. We denote the current state, the next state, the next incoming bit, and the output bit of the Mealy machine by the variables $s$, $t$, $b$ and $y$ respectively. Assume the initial state of the Mealy machine is 0. What are the Boolean expressions corresponding to $t$ and $y$ in terms of $s$ and $b$?- GATE CS - 2021
- Digital Logic
- Combinational and Sequential Circuits
Questions Asked in GATE CS exam
- GATE CS - 2025
- Adjoint and Inverse of a Matrix
Consider the following code:
int a; int arr[] = {30, 50, 10}; int *ptr = arr[10] + 1; a = *ptr; (*ptr)++; ptr = ptr + 1; printf("%d", a + arr[1] + *ptr);In the diagram, the lines QR and ST are parallel to each other. The shortest distance between these two lines is half the shortest distance between the point P and the line QR. What is the ratio of the area of the triangle PST to the area of the trapezium SQRT?
Note: The figure shown is representative
- GATE CS - 2025
- Geometry
Consider the following process information for Shortest Remaining Time First (SRTF) scheduling:
\[ \begin{array}{|c|c|c|} \hline \textbf{Process} & \textbf{Arrival Time (AT)} & \textbf{Burst Time (BT)} \\ \hline P1 & 0 & 10 \\ P2 & 1 & 13 \\ P3 & 2 & 6 \\ P4 & 8 & 9 \\ \hline \end{array} \]Find the turnaround time for each process.
- GATE CS - 2025
- Programming in C
- If IMAGE and FIELD are coded as FHBNJ and EMFJG respectively then, which one among the given options is the most appropriate code for BEACH?
- GATE CS - 2025
- GATE IN - 2025
- GATE MT - 2025
- GATE NM - 2025
- GATE TF - 2025
- Logical and Analytical Reasoning Skills
View More Questions