Chemical used to remove impurities from ore is called
- gangue
- mineral
- flux
- slag
The Correct Option is C
Approach Solution - 1
In the context of metallurgy, the process of extracting and purifying metals from ores involves several steps. An important component in this process is dealing with impurities. The substance used to remove or mitigate these impurities is known as flux.
Let's examine the provided options:
- Gangue: This term refers to the worthless minerals or earthy substances that surround or are closely mixed with the valuable ore. It is not used to remove impurities.
- Mineral: This is a naturally occurring substance that is typically solid and inorganic, with a distinct chemical composition. Minerals are the source materials for metals, not a means to remove impurities.
- Flux: Flux is a chemical cleaning agent. It is used to bind with impurities and form a slag that can be easily removed from the molten metal, thus purifying the ore.
- Slag: This is the by-product formed after a flux has reacted with impurities. It is not used for removing impurities but is the result of their removal.
Therefore, the correct answer is flux.
Approach Solution -2
A flux is a chemical substance used during the extraction of metals to remove impurities (known as gangue) from the ore. The flux reacts with the gangue to form an easily removable compound called slag.
Flux helps in purifying the ore by forming slag with the impurities.
Top Questions on Corrosion
The figure shows a rod PQ, hinged at P, rotating counter-clockwise with a uniform angular speed of 15 rad/s. A block R translates along a slot cut out in rod PQ. At the instant shown the distance \( PR = 0.5 \, {m} \) and \( \theta = 60^\circ \). The relative velocity of R with respect to the rod PQ is 5 m/s at the instant shown. The relative acceleration of R with respect to the rod PQ is zero at the instant shown.
Which one of the following is the CORRECT magnitude of the absolute acceleration (in m/s\(^2\)) of block R?
Consider two blocks, P of mass 100 kg and Q of mass 150 kg, resting as shown in the figure. The angle \( \theta = 30^\circ \). The coefficient of friction between the two blocks is 0.2. Assume no friction exists at all other interfaces. The minimum force required to move the block P upward is \( W \). Which one of the following options is closest to the CORRECT magnitude of \( W \) (in N)?
A force of \( P = 100 \, {N} \) is applied at the ends of the pliers as shown in the figure. Neglecting friction, the force exerted by the upper jaw on the workpiece is ........... N (in integer).
- For a certain linear elastic isotropic material, the Young’s modulus is 140 GPa and the shear modulus is 50 GPa. The Poisson’s ratio for the material is ........... (rounded off to two decimal places).
Consider a beam with a square box cross-section as shown in the figure. The outer square has a length of 10 mm. The thickness of the section is 1 mm. The area moment of inertia about the x-axis is ........... mm\(^4\) (in integer).
Questions Asked in AP POLYCET exam
- Area of a sector of a circle with radius 4 cm and angle 30° is (use \( \pi = 3.14 \)):
- Two cars are seen from the top of a tower of height 75 m with angles of depression \(30^\circ\) and \(45^\circ\). If the cars are on opposite sides of the tower along the same line, the distance between them is:
- AP POLYCET - 2025
- Heights and Distances
- If assumed mean of a data is 47.5, \( \sum f_i d_i = 435 \) and \( \sum f_i = 30 \), then mean of that data is:
- AP POLYCET - 2025
- Arithmetic Mean
- The heat produced in a \( 4 \, \Omega \) resistor when an electric current of \( 5 \, A \) flows in it for \( 2 \) seconds is
- AP POLYCET - 2025
- Resistance
- Evaluate \( \dfrac{2 \tan 30^\circ}{1 + \tan^2 30^\circ} \)
- AP POLYCET - 2025
- Trigonometric Ratios