Question:
As per the Unified Soil Classification System (USCS), the type of soil represented by 'MH' is
As per the Unified Soil Classification System (USCS), the type of soil represented by 'MH' is
Show Hint
In the USCS, the classification 'MH' refers to silts with high plasticity, indicating their ability to undergo significant deformation before failing.
Updated On: Dec 20, 2025
- Inorganic silts of high plasticity with liquid limit more than 50%
- Inorganic silts of low plasticity with liquid limit less than 50%
- Inorganic clays of high plasticity with liquid limit less than 50%
- Inorganic clays of low plasticity with liquid limit more than 50%
Hide Solution
Verified By Collegedunia
The Correct Option is A
Solution and Explanation
In the Unified Soil Classification System (USCS), 'MH' represents inorganic silts of high plasticity with a liquid limit greater than 50%. These soils typically have high plasticity and can be sensitive to changes in water content. Therefore, the correct answer is (A).
Final Answer: Inorganic silts of high plasticity with liquid limit more than 50%
Was this answer helpful?
0
0
Top Questions on Unified and Indian standard soil classification system
- A clayey soil has a moisture content of 18%, a specific gravity of soil solids of 2.74, and a degree of saturation of 65%. The soil soaks up water during a rain event, and the degree of saturation increases to 85.2%. The change of the volume during the soakage is negligible. The new moisture content (in %) of the soil will be ......... (rounded off to 2 decimal places).
- GATE CE - 2025
- Geotechnical Engineering
- Unified and Indian standard soil classification system
- A clayey soil has a moisture content of 18%, a specific gravity of soil solids of 2.74, and a degree of saturation of 65%. The soil soaks up water during a rain event, and the degree of saturation increases to 85.2%. The change of the volume during the soakage is negligible. The new moisture content (in %) of the soil will be ......... (rounded off to 2 decimal places).
- GATE CE - 2025
- Geotechnical Engineering
- Unified and Indian standard soil classification system
- Which one of the following saturated fine-grained soils can attain a negative Skempton's pore pressure coefficient (A) ?
- GATE CE - 2024
- Geotechnical Engineering
- Unified and Indian standard soil classification system
- Four different soils are classified as CH, ML, SP, and SW, as per the Unified Soil Classification System. Which one of the following options correctly represents their arrangement in the decreasing order of hydraulic conductivity?
- GATE CE - 2022
- Geotechnical Engineering
- Unified and Indian standard soil classification system
Questions Asked in GATE CE exam
Consider a five-digit number PQRST that has distinct digits P, Q, R, S, and T, and satisfies the following conditions:
1. \( P<Q \)
2. \( S>P>T \)
3. \( R<T \)
If integers 1 through 5 are used to construct such a number, the value of P is:
- GATE CE - 2025
- Logical and Analytical Reasoning Skills
- Given the following staff readings at two levels, determine the Reduced Level (RL) of B.
Given: - RL of A = 150 m - Find RL of B- GATE CE - 2025
- Surveying and Levelling
- Given the bearing N30°W, determine the corresponding Whole Circle Bearing (WCB). \
Given: - Bearing = N30°W - Find WCB- GATE CE - 2025
- Surveying and Levelling
- Given the following data, determine the final water content \( W_2 \):
Given: - \( W_1 = 18\% \) - \( G_p = 2.74 \) - \( S_1 = 0.65 \) - \( S_2 = 0.852 \) - Find \( W_2 \)- GATE CE - 2025
- Soil Mechanics
- Given the following data for a hydraulic jump, determine the power loss (in kW):
Given: - \( B = 5 \, \text{m} \) - \( Q = 15 \, \text{m}^3/\text{sec} \) - \( y_1 = 0.5 \, \text{m} \) - \( g = 9.81 \, \text{m/s}^2 \) - \( \rho_w = 1000 \, \text{kg/m}^3 \) - \( \alpha = 1.0 \) - Find Power loss in kW- GATE CE - 2025
- Fluid Mechanics
View More Questions