Comprehension
Answer these questions based on the passages.
The Indian steel industry, in line with global trends, is at a crossroads, witnessing a resurgent phase of modernization, expansion and consolidation, mainly through mergers and acquisitions. A sector that was moribund just about five years ago because of a worldwide slump in steel prices, the industry has turned the corner and has in fact been vibrant over the past two years. Domestic steel companies, both public and private, are surging ahead on the strength of an unprecedented buoyancy in the economy and the resultant boom in real estate and various infrastructure sectors such as roads and highways, ports and airports. The official figures speak for themselves. Powered by an increased demand for steel from neighbouring China, which has been clocking a 15 per cent sectorial growth annually on account of construction projects in preparation for the Olympics, the steel industry in India has grown by about 10 per cent in the past two years, compared with the global growth rate of about 6 per cent a year. The country's production of crude steel in 2005-06 stood at 42.1 million tonnes, reflecting an increase of per cent over the previous fiscal. On the other hand, the consumption of steel during the year was pegged at 41.43 million tonnes, a massive growth of 13.88 per cent when compared with the 2004-05 figures. Likewise, the production of sponge iron also increased sharply by 25 per cent, from about 10.3 million tonnes in 2004-05 to 12.9 million tonnes in 2005-06. Currently, India is the largest sponge iron producer in the world and ranks seventh among steelproducing countries. The growth in domestic steel consumption is, by and large, in keeping with the International Iron and Steel Institute (IISI) forecast of a 10 per cent increase in steel use in 2006. While the IISI has projected the global demand for steel to grow by 4.9 per cent in the medium term up to 2010, it has pegged its forecast for the 2010-15 period at 4.2 per cent annually for the entire world. The IISI says India will lead the consumption growth story with an annual demand of 7.7 per cent, followed by China with 6.2 per cent. More heartening is the indication that the exciting phase in the domestic steel industry is expected to continue for the next five to seven years at the least, in terms ofboth consumption and production. Already, the growth in steel consumption, as projected by the United Progressive Alliance (UPA) government in the National Steel Policy (NSP) formulated in 2005, stands exceeded by a huge margin. The NSP had conservatively estimated the country' s steel production to grow by 7.3 per cent, with an annual consumption growth of 6.9 per cent. Considering that the past two years have already witnessed a demand growth of over 10 per cent, the government expects the healthy trend to continue during the Eleventh Plan period (2007-12), provided an annual gross domestic product (GDP) growth of 9 per cent is achieved during the period as projected by the Planning Commission. Clearly, for primary steel producers, India is the place to be in as it has the greatest growth potential. Coupled with this are two other major factors. One, India is bestowed with the largest reserves of high-quality ironore in the world. Secondly, the annual per capita consumption of steel in the country is still one of the lowest in the world, at 35 kilograms against the global benchmark of 250400 kg. In effect, the growth story in India is here to stay for quite a few decades in view of the sheer disparity in consumption levels. Not surprising, then, that when the three ore-rich states — Iharkhand, Orissa and Chhattisgarh— threw open their doors, steel-makers of all hues jumped into the fray to sign memoranda of understanding (MoUs) with more than one state government. In all, more than 1 16 MoUs have already been inked, pledging a total investment of a whopping Rs 3,57 ,344 crores in the coming years. If all the pledges materialise, the country's installed steel production capacity will surge to anywhere between 150 million and 180 million tonnes by 2014-15, compared with the conservative NSP target of 110 million tonnes by 2019-20. Orissa signed 43 MoUs to hike its production capacity to 58.04 million tonnes. Not to be left behind, Chhattisgarh entered into 42 MoUs to augment its steel capacity to 19.32 million tonnes, while Jharkhand signed 31 MoUs to increase its capacity to 68.67 million tonnes. The extensive availability of rich iron-ore— the basic raw material for steel-making — in the three states has attracted big global names too who, at the outset, made it clear that they would require captive iron-ore mines to feed their greenfield steel projects. Initially, it was the home-grown Tata Steel that signed an MOU with the Orissa government, in November 2004 for setting up a six-million-tonne plant at an estimated cost of Rs 15,400 crores after the government made a commitment that its ore requirement of 250 million tonnes for a period of 25 years would be met. By the time Pohang Iron and Steel Company (POSCO), the South Korean major and third largest global steel producer, approached the Orissa government, the terms turned out to be far sweeter. Under the MOU signed in June 2005, POSCO plans to set up a 12-million-tonne plant at Paradeep, with an investment of Rs 51,000 crores. The initial proposal was for a 10-milliontonne plant. But there is a catch here. The government has committed itself not only to provide 600 million tonnes of ore on a captive basis for a period of 30 years but also allowing POSCO to export the quality domestic ore for use in its steel plants in Korea. It has demanded the raw material from mines in Sundergarh and Keonjhar districts. Lakshmi N Mittal, the non-resident Indian (NRI) tycoon and world's biggest steel-maker following the merger of Mittal Steels with the Luxembourg-based Arcelor in June last year, did still better. He put Jharkhand and Orissa in competition by proposing a steel venture in either state, depending upon the terms and incentives and the swiftness in approvals. Jharkhand lost out—owing to litigation over its Chiraia ore mines and for other reasons — to Orissa, which signed an MOU with Mittal Arcelor in December last year for a 12million-tonne steel plant at Keonjhar.
The state-owned Steel Authority of India Limited (SAIL) also undertook a major exercise to retain its position as the leading integrated steel producer in the country. The steel behemoth announced its "Corporate Plan- 2012,' envisaging an outlay of Rs. 37,000 crores to upgrade its plants and modernise its operations. Under the plan, expansion programmes are under way in various SAIL units to enhance the total production capacity to 22.9 million tonnes of hot metal from the present 12.5 million tonnes by 2011-12. Late last year, following the merger of IISCO with SAIL, Prime Minister Manmohan Singh laid the foundation stone for the modernisation and expansion of ISP (IISCO Steel Plant) with an investment of Rs 9,592 crores. Mergers of a few more state-owned units with SAIL are on the cards with a view to consolidating public sector share in the steelmarket. The other public sector steel enterprise, Rashtriya Ispat Nigam Ltd (RINL), is already in the process of implementing an ambitious expansion programme for increasing its liquid steel capacity from the current three million tonnes to 6.3 million tonnes at an estimated cost of Rs 8,692 crores. Launched on May 20, 2006, the project is scheduled for completion by 2008-09. Needless to say, the demand for iron-ore has surged in view of the long-term supply commitments being given by the State governments at a time when the international market prices for the raw material are at a high.
This sparked off a debate among domestic steel-makers on whether liberal ore exports should he permitted, as in the past, or the ore should be conserved to the extent possible in view of the projected demand for steel. The government set up a committee under the Planning Commission, headed by Anwarul Hoda, to recommend changes in the National Mineral Policy. The existing policy permits free exports of iron ore with a ferrous content of less than 64 per cent. For export of high-grade ore with higher ferrous content, a licence is required and is currently canalised through the Minerals and Metals Trading Corporation (MMTC). The Hoda Committee recommended free exports of iron ore with a ferrous content of less than 65 per cent but advocated discontinuation of the existing regime of canalisation and export licensing for the high-grade ore. Instead, the panel suggested free exports of quality ore lumps with ferrous content of more than 65 per cent on payment of an export duty.
The Indian steel industry, in line with global trends, is at a crossroads, witnessing a resurgent phase of modernization, expansion and consolidation, mainly through mergers and acquisitions. A sector that was moribund just about five years ago because of a worldwide slump in steel prices, the industry has turned the corner and has in fact been vibrant over the past two years. Domestic steel companies, both public and private, are surging ahead on the strength of an unprecedented buoyancy in the economy and the resultant boom in real estate and various infrastructure sectors such as roads and highways, ports and airports. The official figures speak for themselves. Powered by an increased demand for steel from neighbouring China, which has been clocking a 15 per cent sectorial growth annually on account of construction projects in preparation for the Olympics, the steel industry in India has grown by about 10 per cent in the past two years, compared with the global growth rate of about 6 per cent a year. The country's production of crude steel in 2005-06 stood at 42.1 million tonnes, reflecting an increase of per cent over the previous fiscal. On the other hand, the consumption of steel during the year was pegged at 41.43 million tonnes, a massive growth of 13.88 per cent when compared with the 2004-05 figures. Likewise, the production of sponge iron also increased sharply by 25 per cent, from about 10.3 million tonnes in 2004-05 to 12.9 million tonnes in 2005-06. Currently, India is the largest sponge iron producer in the world and ranks seventh among steelproducing countries. The growth in domestic steel consumption is, by and large, in keeping with the International Iron and Steel Institute (IISI) forecast of a 10 per cent increase in steel use in 2006. While the IISI has projected the global demand for steel to grow by 4.9 per cent in the medium term up to 2010, it has pegged its forecast for the 2010-15 period at 4.2 per cent annually for the entire world. The IISI says India will lead the consumption growth story with an annual demand of 7.7 per cent, followed by China with 6.2 per cent. More heartening is the indication that the exciting phase in the domestic steel industry is expected to continue for the next five to seven years at the least, in terms ofboth consumption and production. Already, the growth in steel consumption, as projected by the United Progressive Alliance (UPA) government in the National Steel Policy (NSP) formulated in 2005, stands exceeded by a huge margin. The NSP had conservatively estimated the country' s steel production to grow by 7.3 per cent, with an annual consumption growth of 6.9 per cent. Considering that the past two years have already witnessed a demand growth of over 10 per cent, the government expects the healthy trend to continue during the Eleventh Plan period (2007-12), provided an annual gross domestic product (GDP) growth of 9 per cent is achieved during the period as projected by the Planning Commission. Clearly, for primary steel producers, India is the place to be in as it has the greatest growth potential. Coupled with this are two other major factors. One, India is bestowed with the largest reserves of high-quality ironore in the world. Secondly, the annual per capita consumption of steel in the country is still one of the lowest in the world, at 35 kilograms against the global benchmark of 250400 kg. In effect, the growth story in India is here to stay for quite a few decades in view of the sheer disparity in consumption levels. Not surprising, then, that when the three ore-rich states — Iharkhand, Orissa and Chhattisgarh— threw open their doors, steel-makers of all hues jumped into the fray to sign memoranda of understanding (MoUs) with more than one state government. In all, more than 1 16 MoUs have already been inked, pledging a total investment of a whopping Rs 3,57 ,344 crores in the coming years. If all the pledges materialise, the country's installed steel production capacity will surge to anywhere between 150 million and 180 million tonnes by 2014-15, compared with the conservative NSP target of 110 million tonnes by 2019-20. Orissa signed 43 MoUs to hike its production capacity to 58.04 million tonnes. Not to be left behind, Chhattisgarh entered into 42 MoUs to augment its steel capacity to 19.32 million tonnes, while Jharkhand signed 31 MoUs to increase its capacity to 68.67 million tonnes. The extensive availability of rich iron-ore— the basic raw material for steel-making — in the three states has attracted big global names too who, at the outset, made it clear that they would require captive iron-ore mines to feed their greenfield steel projects. Initially, it was the home-grown Tata Steel that signed an MOU with the Orissa government, in November 2004 for setting up a six-million-tonne plant at an estimated cost of Rs 15,400 crores after the government made a commitment that its ore requirement of 250 million tonnes for a period of 25 years would be met. By the time Pohang Iron and Steel Company (POSCO), the South Korean major and third largest global steel producer, approached the Orissa government, the terms turned out to be far sweeter. Under the MOU signed in June 2005, POSCO plans to set up a 12-million-tonne plant at Paradeep, with an investment of Rs 51,000 crores. The initial proposal was for a 10-milliontonne plant. But there is a catch here. The government has committed itself not only to provide 600 million tonnes of ore on a captive basis for a period of 30 years but also allowing POSCO to export the quality domestic ore for use in its steel plants in Korea. It has demanded the raw material from mines in Sundergarh and Keonjhar districts. Lakshmi N Mittal, the non-resident Indian (NRI) tycoon and world's biggest steel-maker following the merger of Mittal Steels with the Luxembourg-based Arcelor in June last year, did still better. He put Jharkhand and Orissa in competition by proposing a steel venture in either state, depending upon the terms and incentives and the swiftness in approvals. Jharkhand lost out—owing to litigation over its Chiraia ore mines and for other reasons — to Orissa, which signed an MOU with Mittal Arcelor in December last year for a 12million-tonne steel plant at Keonjhar.
The state-owned Steel Authority of India Limited (SAIL) also undertook a major exercise to retain its position as the leading integrated steel producer in the country. The steel behemoth announced its "Corporate Plan- 2012,' envisaging an outlay of Rs. 37,000 crores to upgrade its plants and modernise its operations. Under the plan, expansion programmes are under way in various SAIL units to enhance the total production capacity to 22.9 million tonnes of hot metal from the present 12.5 million tonnes by 2011-12. Late last year, following the merger of IISCO with SAIL, Prime Minister Manmohan Singh laid the foundation stone for the modernisation and expansion of ISP (IISCO Steel Plant) with an investment of Rs 9,592 crores. Mergers of a few more state-owned units with SAIL are on the cards with a view to consolidating public sector share in the steelmarket. The other public sector steel enterprise, Rashtriya Ispat Nigam Ltd (RINL), is already in the process of implementing an ambitious expansion programme for increasing its liquid steel capacity from the current three million tonnes to 6.3 million tonnes at an estimated cost of Rs 8,692 crores. Launched on May 20, 2006, the project is scheduled for completion by 2008-09. Needless to say, the demand for iron-ore has surged in view of the long-term supply commitments being given by the State governments at a time when the international market prices for the raw material are at a high.
This sparked off a debate among domestic steel-makers on whether liberal ore exports should he permitted, as in the past, or the ore should be conserved to the extent possible in view of the projected demand for steel. The government set up a committee under the Planning Commission, headed by Anwarul Hoda, to recommend changes in the National Mineral Policy. The existing policy permits free exports of iron ore with a ferrous content of less than 64 per cent. For export of high-grade ore with higher ferrous content, a licence is required and is currently canalised through the Minerals and Metals Trading Corporation (MMTC). The Hoda Committee recommended free exports of iron ore with a ferrous content of less than 65 per cent but advocated discontinuation of the existing regime of canalisation and export licensing for the high-grade ore. Instead, the panel suggested free exports of quality ore lumps with ferrous content of more than 65 per cent on payment of an export duty.
Question: 1
According to the passage, the steel industry in India has grown by in the past two years and In dia ranks among steel-producing countries.
According to the passage, the steel industry in India has grown by in the past two years and In dia ranks among steel-producing countries.
Updated On: Oct 7, 2024
- 12%, sixth
- 10%, seventh
- 8%, first
- 6% eighth
Hide Solution
Verified By Collegedunia
The Correct Option is A
Solution and Explanation
The correct option is (A): 12%, sixth
Was this answer helpful?
0
0
Question: 2
............ per cent is the projected global demand for steel to grow in the medium term up to 2010.
............ per cent is the projected global demand for steel to grow in the medium term up to 2010.
Updated On: Oct 7, 2024
- 6.9
- 5.9
- 4.9
- 3.9
Hide Solution
Verified By Collegedunia
The Correct Option is B
Solution and Explanation
The correct option is (B): 5.9
Was this answer helpful?
0
0
Question: 3
According to the International Iron and Steel Institute, India will lead the consumption growth with an annual demand of ...... per cent, followed by China with percent.
According to the International Iron and Steel Institute, India will lead the consumption growth with an annual demand of ...... per cent, followed by China with percent.
Updated On: Oct 7, 2024
- 6.2, 5.7
- 5.2, 3.2
- 8.7.6.7
- 7.7,6.2
Hide Solution
Verified By Collegedunia
The Correct Option is D
Solution and Explanation
The correct option is (D): 7.7,6.2
Was this answer helpful?
0
0
Question: 4
Which one of the following statements is incorrect?
Which one of the following statements is incorrect?
Updated On: Oct 7, 2024
- The licence for export of high-grade iron ore is being canalised through MMTC.
- With the merger of Mittal Steels with Arcelor, LN Mittal is the world's biggest steel-maker.
- A South Korean company is the world's third largest steel producer.
- As per Corporate Plan-2012 of Steel Authority of India Limited, the total production capacity will be enhanced to 12.5 million tonnes by 2011-12
Hide Solution
Verified By Collegedunia
The Correct Option is D
Solution and Explanation
The correct option is (D): As per Corporate Plan-2012 of Steel Authority of India Limited, the total production capacity will be enhanced to 12.5 million tonnes by 2011-12
Was this answer helpful?
0
0
Top Questions on Reading Comprehension
- Read the excerpt from a Handicrafts Manual: ‘Advanced Knitting Techniques’ and answer the following questions by choosing the most appropriate answer.
THE FAIR ISLE METHOD: Fair Isle knitting is a traditional technique that involves using two or more colours of yarn in a single row to create intricate patterns and designs. This method requires careful tension management to ensure even stitches and prevent puckering. To begin, select your colours and cast on the desired number of stitches. As you knit, alternate between colours every few stitches, carrying the unused yarn along the back of the work. Mastering the Fair Isle technique allows you to create stunning visual effects in garments, accessories, and home textiles.
THE CONTINENTAL STYLE: The Continental knitting style, often referred to as “picking,” involves holding the yarn in the left hand while the right hand manipulates the needles. This method allows for greater speed and efficiency, particularly when working with complex patterns or multiple colours. To practice this style, start by casting on your stitches and using your left hand to tension the yarn. With each stitch, simply “pick” the yarn with your right needle, forming a quick and fluid motion. As you become comfortable with this technique, you may find that your overall knitting speed and comfort improve significantly.
THE SHORT-ROW TECHNIQUE: Short-row knitting is an advanced technique that allows for the creation of shaped garments, such as sleeves and shoulders, without the need for complex shaping. To make a sleeve using this technique, begin by casting on the required number of stitches. Work a portion of the row, then turn your work and return without completing the full row to create the “short rows” that shape the curves of the sleeve. To prevent holes at the turn, wrap the stitch before you turn your work. Repeat this process as needed to achieve the desired shaping and dimension of the sleeve. Once you have shaped the sleeve, you can then sew the side seams to connect the pieces of your garment and finally, complete the edges to ensure a clean finish. This method not only helps shape curves but also adds dimension to your piece, allowing you to enhance fit and style.- AILET BALLB (Hons.) - 2025
- English
- Reading Comprehension
- Read the following passage and answer the following questions by choosing the most appropriate answer.
The Story of Coffee
Coffee, a beloved beverage enjoyed by millions around the globe, has a rich and captivating history that spans centuries. The story of coffee begins in the ancient highlands of Ethiopia, where, according to legend, a goat herder named Kaldi discovered the stimulating effects of coffee beans. One day, Kaldi noticed his goats frolicking with unusual energy after eating red berries from a certain tree. Curious, he tried the berries himself and experienced a newfound alertness. This discovery soon spread to monasteries, where monks used it to stay awake during long hours of prayer. From Ethiopia, coffee cultivation and consumption spread to the Arabian Peninsula, particularly in Yemen, where the practice of roasting coffee beans and brewing the drink began to take shape. By the 15th century, coffee had become a popular beverage in the Islamic world, with coffee houses known as ‘qahveh khaneh’ emerging as social hubs for conversation, music, and intellectual exchange. These coffee houses became centers of culture and commerce, influencing the spread of coffee to Turkey and beyond, eventually reaching Europe. In Europe, coffee initially faced resistance from religious authorities who considered it a ‘Muslim drink’ and tried to ban it. However, its popularity persisted, and by the 17th century, coffee houses had sprung up in major European cities, becoming important gathering places for artists, writers, and thinkers. The stimulating effects of coffee were embraced during the Age of Enlightenment, where it was seen as a catalyst for intellectual discussion and innovation. The journey of coffee continued with the establishment of colonial plantations in tropical regions such as the Caribbean, Central and South America, and Southeast Asia. These plantations fuelled the global demand for coffee, transforming it from a regional specialty to a major commodity. The industrial revolution further accelerated coffee production and consumption, leading to innovations in coffee brewing methods and the development of instant coffee. In the modern era, coffee has evolved into a deeply ingrained part of daily life for people worldwide. Its cultural significance spans from the bustling cafes of Paris to the quiet coffee farms of Colombia. Today, coffee remains not only a popular beverage but also a symbol of social interaction, productivity, and enjoyment. Whether sipped slowly over a conversation with friends or grabbed hastily on the way to work, the story of coffee continues to unfold, intertwining with the histories and cultures of countless societies across the globe.- AILET BALLB (Hons.) - 2025
- English
- Reading Comprehension
- Read the following passage and answer the following questions by choosing the most appropriate answer.
The intricate world of modern manufacturing is a web of precision and innovation, where even the tiniest components play a pivotal role. One such element, often overlooked but crucial, is the sub-subpart. Whether it’s a carpenter fashioning a bespoke piece of furniture or an automobile engineer designing the next generation of vehicles, the creation of sub-subparts is a fundamental process that demands meticulous craftsmanship and cutting-edge technology. In the realm of woodworking, carpenters frequently work with sub-subparts like dowels, screws, and hinges. These minute components may appear insignificant, yet they determine the structural integrity and functionality of the final product. Crafting a dowel, for instance, begins with selecting the appropriate wood species, followed by precision cutting and shaping. The result is a perfectly cylindrical, sturdy sub-subpart that seamlessly joins two larger pieces of wood. The advent of computer-aided design (CAD) and computer numerical control (CNC) machines has revolutionised this process, enabling carpenters to create sub-subparts with unparalleled precision.
Similarly, in the automobile industry, sub-subparts are the unsung heroes of vehicle construction. Take, for instance, the ball bearing—a minuscule but essential component in the wheels and transmission system. Manufacturing these precision-engineered spheres involves intricate processes like forging, heat treatment, and precision machining. Modern techniques such as laser cutting and 3D printing have streamlined production, ensuring that these sub-subparts meet the demanding standards of the automotive sector. The manufacturing of sub-subparts is a testament to the convergence of traditional craftsmanship and cutting-edge technology. Whether it’s a carpenter’s workshop or a high-tech automotive assembly line, the quest for perfection in sub-subpart creation remains unwavering. The attention to detail and precision required in these processes is a testament to the dedication of craftsmen and engineers alike.
To conclude, while sub-subparts may be small in size, their significance in various industries cannot be overstated. Whether it’s a carpenter working on a timeless piece of furniture or an automotive engineer striving for superior performance, the manufacturing of sub-subparts is a crucial step towards achieving excellence in craftsmanship and technology. This fusion of tradition and innovation accentuates the essence of modern manufacturing.- AILET BALLB (Hons.) - 2025
- English
- Reading Comprehension
- Read the book descriptions for three different books and answer the questions by choosing the most appropriate options.
\(\text{The Politics of Change}\) \(\text{The Change in Politics}\) \(\text{Politics and Change:}\) A Global Perspective} In "The Politics of Change," political analyst Dr. Emily Harper examines the dynamics of social movements and their impact on policy reform. Through detailed case studies, she explores how grassroots organizations, protests, and advocacy campaigns shape public opinion and influence lawmakers. Dr. Harper provides insights into the strategies that successful movements employ and discusses the challenges they face in a complex political landscape. She discusses key strategies, such as coalition-building, media engagement, and the use of digital platforms to amplify voices. This book by veteran journalist Mark Stevens investigates the shifting political landscape in the 21st century. Focusing on major elections, emerging political parties, and the role of social media, Stevens analyzes how technology and demographics are transforming political engagement and voter behaviour. Through interviews with political leaders, campaign strategists, and everyday voters, Stevens uncovers how demographic shifts and technological advancements are reshaping political discourse in urban areas. He analyzes the implications of these changes for traditional political institutions and explores how movements like #MeToo and Black Lives Matter have disrupted conventional narratives. In this insightful work, international relations scholar Dr. Anika Patel presents a global analysis of political change across various regions. She explores the factors that drive political transitions, including economic shifts, cultural movements, and international influences. Dr. Patel emphasizes the interconnectedness of global politics and how local changes can have far-reaching implications. She analyzes various factors driving political transitions, including economic upheaval, cultural shifts, and the impact of globalization. She provides case studies from diverse regions, such as the Arab Spring, democratic movements in Latin America, and shifts in power in Asia. The book serves as a vital resource for understanding the complexities of political evolution in a rapidly changing world. - AILET BALLB (Hons.) - 2025
- English
- Reading Comprehension
- The levels of dissolved oxygen in the world's ocean waters are declining precipitously. Just like humans, fish need oxygen to survive, and so in ocean areas experiencing significant levels of oxygen scarcity, or hypoxia, fish populations are plummeting. Although some hypoxic areas, called "dead zones," occur naturally, hypoxia in coastal areas and inland waters is caused mainly by agricultural run-off and by discharge of industrial wastewater. More than one hundred permanent dead zones, many covering thousands of square miles, exist worldwide today.
Since reproductive success is the most critical factor in the sustainability of any species, the extent of this threat to marine life and genetic diversity can hardly be overstated. After several months in hypoxic waters, female fish produce fewer eggs. Moreover, hypoxic conditions serve to alter the normal ratio between two particular hormones manufactured during the embryonic stage when a fish's gender is determined. During gestation and under these conditions, the mother produces more testosterone (and less estradiol), which inhibits the development of female reproductive organs and other female characteristics in the embryo, while promoting the development of male traits.
The implications of declining oxygen levels extend beyond individual species to entire ecosystems. Marine biodiversity is at risk as species that cannot adapt to hypoxic conditions may face extinction, leading to a cascade of effects throughout the food web. Predators may struggle to find adequate prey, while other marine organisms, such as coral reefs, which rely on healthy fish populations for symbiotic relationships, may also deteriorate. The loss of biodiversity can disrupt ecosystem services that are essential for human communities, including fisheries, tourism, and coastal protection.- AILET BALLB (Hons.) - 2025
- English
- Reading Comprehension
View More Questions
Questions Asked in MAT exam
- In the following sentence, a part of the sentence is underlined. Beneath each sentence four different ways of phrasing the underlined part are indicated. Choose the best alternative among the four options.
There \(\underline {\text{have}\ \text{been}\ \text{heavy}\ \text{rainfall}}\) yesterday- MAT - 2018
- Sentence Correction
- Who among the following cannot be impeached?
- MAT - 2018
- Politics and Government
- Who is leading the LTTE delegation for the peace process with Sri Lanka?
- MAT - 2018
- International Organizations
- Who was the first UN Secretary General?
- MAT - 2018
- Politics and Government
- Which of the following sources yields the maximum revenue to the Union Government?
- MAT - 2018
- Politics and Government
View More Questions