An example for two pair partially soluble and one pair completely soluble is ____
Show Hint
- Chloroform – water – acetone
- Benzene – water – acetic acid
- Chloro-benzene – water – methyl ethyl ketone
- Naphthalene – aniline – isooctane
The Correct Option is C
Solution and Explanation
This type of system is used in ternary extraction design.
Top Questions on Mass Transfer
A wet solid of 100 kg containing 30 wt% moisture is to be dried to 2 wt% moisture in a tray dryer. The critical moisture content is 10 wt% and the equilibrium moisture content is 1 wt%. The drying rate during the constant rate period is 10 kg/(h m²). The drying curve in the falling rate period is linear. If the drying area is 5 m², the time required for drying ___________ h (rounded off to 1 decimal place).
Solute \(A\) is absorbed from a gas into water in a packed bed operating at steady state. The absorber operating pressure and temperature are 1 atm and 300 K, respectively. At the gas-liquid interface, \(y_i = 1.5 x_i\),
where \(y_i\) and \(x_i\) are the interfacial gas and liquid mole fractions of \(A\), respectively. At a particular location in the absorber, the mole fractions of \(A\) in the bulk gas and in the bulk water are 0.02 and 0.002, respectively. If the ratio of the local individual mass transfer coefficients for the transport of \(A\) on the gas-side (\(k_y\)) to that on the water-side (\(k_x\)), \(\frac{k_y}{k_x} = 2\), then \(y_i\) equals _________ (rounded off to 3 decimal places).- If \( k \) is the mass transfer coefficient and \( D_v \) is the molecular diffusivity, which one of the following statements is NOT CORRECT with respect to mass transfer theories?
- The increase in weight of dried porcelain crucible in humid atmosphere is because of ____
- TS PGECET - 2024
- Chemical Engineering
- Mass Transfer
- The diffusivity (D) in a binary gas mixture is related to the temperature (T) as ____
- TS PGECET - 2024
- Chemical Engineering
- Mass Transfer
Questions Asked in TS PGECET exam
- Melting rates of electrodes in manual metal arc welding process is mainly governed by the
- TS PGECET - 2024
- Manufacturing Processes
- The maximum area of a rectangle that can be inscribed in a circle of radius $R$ is
- TS PGECET - 2024
- 3D Geometry
- For the matrix \[ \begin{bmatrix} 2 & 1 & 1 \\ 0 & 2 & 1 \\ 1 & 0 & 1 \end{bmatrix}, \] an Eigen vector among the following vectors is
- TS PGECET - 2024
- Linear Algebra
- Which of the following expression is a tautology?
- TS PGECET - 2024
- Digital Logic
- The 2’s complement representation of the decimal value $-15$ is
- TS PGECET - 2024
- Digital Logic
