Question:

A winder operates at 750 m/min with 93% efficiency. The time (in minutes) taken for the winder to wind 1.2 kg of 20 tex yarn is approximately _______.

Updated On: Oct 13, 2024

68
74
86
90

Hide Solution

Verified By Collegedunia

The Correct Option is C

Solution and Explanation

The correct option is (C):86

Was this answer helpful?

2

0

Top Questions on Yarn Manufacture, Structure and Properties

The breaking strain of a yarn is 1.5. If the stress (\( \sigma \)) and the strain (\( \epsilon \)) of the yarn are related as, \( \sigma = 1.5 \epsilon^2 \), then the work factor of the yarn (rounded off to 2 decimal places) is:
- GATE TF - 2025
- Textile Engineering and Fibre Science
- Yarn Manufacture, Structure and Properties
View Solution
Group I indicates type of spun yarns and group II indicates yarn characteristics. Match the yarns with their characteristics.
- GATE TF - 2025
- Textile Engineering and Fibre Science
- Yarn Manufacture, Structure and Properties
View Solution
The twist in a 36 Ne cotton yarn is 15 tpi. The twist multiplier (TM) in cotton system of the yarn (correct to 1 decimal place) is _________.
- GATE TF - 2025
- Textile Engineering and Fibre Science
- Yarn Manufacture, Structure and Properties
View Solution
A woven fabric has weft yarn of 24 tex and pick density of 25 per cm. It is desired to replace only the weft with a 6 tex yarn of the same packing density. The pick density per cm required to keep the fabric cover the same (answer in integer) is _________.
- GATE TF - 2025
- Textile Engineering and Fibre Science
- Yarn Manufacture, Structure and Properties
View Solution
The parameter(s) required to convert load-elongation curve to stress-strain curve of a yarn is/are:
- GATE TF - 2025
- Textile Engineering and Fibre Science
- Yarn Manufacture, Structure and Properties
View Solution

View More Questions

Questions Asked in GATE TF exam

View More Questions