Question:

A potentiometer circuit is set up as shown. The potential gradient, across the potentiometer wire, is $k$ volt/cm and the ammeter, present in the circuit, reads $1.0\, A$ when two way key is switched off. The balance points, when the key between the terminals (i) $1$ and $2$ (ii) $1$ and $3$, is plugged in, are found to be at lengths $l_1$ cm and $l_2$ cm respectively. The magnitudes, of the resistors $R$ and $X$, in ohms, are then, equal, respectively, to

Updated On: Aug 16, 2024
  • $k(l_2-l_1)$ and $ kl_2$
  • $kl_1$ and $ k(l_2-l_1)\, $
  • $k(l_2-l_1)$ and $ kl_1$
  • $kl_1$ and $ kl_2 $
Hide Solution
collegedunia
Verified By Collegedunia

The Correct Option is B

Solution and Explanation

When the two way key is switched off, then
The current flowing in the resistors $R$ and $X$ is $\, \, \, \, I = 1\, A $...(i)
When the key between the terminals $1$ and $2$ is plugged in, then
Potential difference across $ R = IR = kl_1$..(ii)
where $k$ is the potential gradient across the potentiometer wire
When the key between the terminals $1$ and $3$ is plugged in, then
Potential difference across $(R+X)=I (R+X)=kl_2$ ...(iii)
From equation (ii), we get
$\, \, \, \, R = \frac{kl_1}{I} =\frac{kl_1}{I}= kl_1\, \Omega $...(iv)
From equation (iii), we get
$\, \, \, \, R +X = \frac{kl_2}{I} =\frac{kl_2}{I}= kl_2\, \Omega $ (Using(i))
$ X = kl_2 - R$
$ = kl_2 - kl_1$ (Using(iv)
$ = k(l_2 - l_1)\, \Omega$
Was this answer helpful?
0
0

Concepts Used:

Current Electricity

Current electricity is defined as the flow of electrons from one section of the circuit to another.

Types of Current Electricity

There are two types of current electricity as follows:

Direct Current

The current electricity whose direction remains the same is known as direct current. Direct current is defined by the constant flow of electrons from a region of high electron density to a region of low electron density. DC is used in many household appliances and applications that involve a battery.

Alternating Current

The current electricity that is bidirectional and keeps changing the direction of the charge flow is known as alternating current. The bi-directionality is caused by a sinusoidally varying current and voltage that reverses directions, creating a periodic back-and-forth motion for the current. The electrical outlets at our homes and industries are supplied with alternating current.