Question:

A monopropellant liquid rocket engine has 800 injectors of diameter 4 mm each, and with a discharge coefficient of 0.65. The liquid propellant of density 1000 kg/m³ flows through the injectors. There is a pressure difference of 10 bar across the injectors. The specific impulse of the rocket is 1500 m/s. The thrust generated by the rocket is \_\_\_\_\_ kN (rounded off to one decimal place).

Show Hint

For monopropellant engines, the thrust can be calculated by determining the mass flow rate using the discharge coefficient and the pressure difference, then multiplying by the specific impulse.
Updated On: Apr 10, 2025
Hide Solution
collegedunia
Verified By Collegedunia

Solution and Explanation

Step 1: Given Data Number of injectors: $n = 800$ Diameter of each injector: $d = 4\, {mm} = 0.004\, {m}$ Discharge coefficient: $C_d = 0.65$ Density of propellant: $\rho = 1000\, {kg/m}^3$ Pressure difference: $\Delta P = 10\, {bar} = 10^6\, {Pa}$ Specific impulse: $I_{sp} = 1500\, {m/s}$ \end{itemize} Step 2: Flow rate through one injector \[ A = \frac{\pi d^2}{4} = \frac{\pi (0.004)^2}{4} = 1.2566 \times 10^{-5}\, {m}^2 \] \[ \dot{m}_{{one}} = C_d \cdot A \cdot \sqrt{2 \rho \Delta P} = 0.65 \cdot 1.2566 \times 10^{-5} \cdot \sqrt{2 \cdot 1000 \cdot 10^6} \] \[ = 0.65 \cdot 1.2566 \times 10^{-5} \cdot 44721.4 \approx 0.365\, {kg/s} \] Step 3: Total mass flow rate \[ \dot{m}_{{total}} = n \cdot \dot{m}_{{one}} = 800 \cdot 0.365 \approx 292\, {kg/s} \] Step 4: Thrust calculation \[ F = \dot{m} \cdot I_{sp} = 292 \cdot 1500 = 438000\, {N} = 438.0\, {kN} \]
Was this answer helpful?
0
0

Top Questions on Jet Propulsion

View More Questions

Questions Asked in GATE AE exam

View More Questions