A map is prepared with a scale of 1:1000 and a contour interval of 1 m. If the distance between two adjacent contours on the map is 10 mm, the slope of the ground between the adjacent contours is
- 30%
- 10%
- 35%
- 40%
The Correct Option is B
Solution and Explanation
Top Questions on Maps
In a map based on the UTM projection, the grid distance is in error with respect to the geodetic distance by about one in four thousand. If the map distance is 3 cm and the map scale is 1:25,000, then the geodetic distance is ___________
In a map based on the UTM projection, the grid distance is in error with respect to the geodetic distance by about one in four thousand. If the map distance is 3 cm and the map scale is 1:25,000, then the geodetic distance is ___________m (rounded off to 2 decimal places).
In a Survey of India topographic map of scale 1:50,000, the contours are drawn conventionally at intervals of __________ m.
- Which one of the following map projections is NOT conformal?
- In an image with 6-bit quantization level, the pixel values of a scene are between 25 and 55. A linear contrast stretch is applied to the image covering the full dynamic range. A pixel value 40 in the original image will be mapped to ________ (rounded off to nearest integer) in the stretched image.
Questions Asked in GATE CE exam
Consider a five-digit number PQRST that has distinct digits P, Q, R, S, and T, and satisfies the following conditions:
1. \( P<Q \)
2. \( S>P>T \)
3. \( R<T \)
If integers 1 through 5 are used to construct such a number, the value of P is:
- GATE CE - 2025
- Logical and Analytical Reasoning Skills
- Given the following staff readings at two levels, determine the Reduced Level (RL) of B.
Given: - RL of A = 150 m - Find RL of B- GATE CE - 2025
- Surveying and Levelling
- Given the bearing N30°W, determine the corresponding Whole Circle Bearing (WCB). \
Given: - Bearing = N30°W - Find WCB- GATE CE - 2025
- Surveying and Levelling
- Given the following data, determine the final water content \( W_2 \):
Given: - \( W_1 = 18\% \) - \( G_p = 2.74 \) - \( S_1 = 0.65 \) - \( S_2 = 0.852 \) - Find \( W_2 \)- GATE CE - 2025
- Soil Mechanics
- Given the following data for a hydraulic jump, determine the power loss (in kW):
Given: - \( B = 5 \, \text{m} \) - \( Q = 15 \, \text{m}^3/\text{sec} \) - \( y_1 = 0.5 \, \text{m} \) - \( g = 9.81 \, \text{m/s}^2 \) - \( \rho_w = 1000 \, \text{kg/m}^3 \) - \( \alpha = 1.0 \) - Find Power loss in kW- GATE CE - 2025
- Fluid Mechanics