Question:
A feedback circuit usually employs ..... network
A feedback circuit usually employs ..... network
Updated On: Oct 7, 2024
- Resistive
- Capacitive
- Inductive
- both Capacitive and Inductive
Hide Solution
Verified By Collegedunia
The Correct Option is A
Solution and Explanation
The correct option is (A): Resistive
Was this answer helpful?
0
0
Top Questions on Electric Circuit
- A circuit which resonates at 1 MHz has a Q of 10. Bandwidth between half-power points is
- CUET (PG) - 2025
- Electronics Engineering
- Electric Circuit
- In the figure shown below, the ideal switch has been open for a long time. If it is closed at \(t=0\), then the magnitude of the current (in mA) through the 4 k\(\Omega\) resistor at \(t=0+\) is
- CUET (PG) - 2025
- Electronics Engineering
- Electric Circuit
- For the two port network shown below, The impedances \( Z_{11}, Z_{12}, \) and \( Z_{22} \) (in \( \Omega \)) are A. \(6\Omega\), B. \(9\Omega\), C. \(24\Omega\). Choose the correct sequence of \(Z_{11}, Z_{12}, Z_{22}\) in answer from the options given below:
- CUET (PG) - 2025
- Electronics Engineering
- Electric Circuit
- The nodal method of circuit analysis is based on
- CUET (PG) - 2025
- Electronics Engineering
- Electric Circuit
- In the circuit shown below, the current through the inductor (in A) is
- CUET (PG) - 2025
- Electronics Engineering
- Electric Circuit
View More Questions
Questions Asked in SRMJEEE exam
- A current of 2 A passes through a coil of 100 turns, producing a magnetic flux of 5 × 10⁻⁵ Wb per turn. What is the magnetic energy associated with the coil?
- SRMJEEE - 2025
- Magnetic Field
- A box contains 5 red balls and 7 blue balls. Two balls are drawn at random without replacement. What is the probability that both balls are red?
- SRMJEEE - 2025
- Probability
- Calculate the Reynolds number for a liquid with density 1 g/cm³ and viscosity 8 × 10⁻⁴ Pa·s, flowing at 0.5 m/s through a pipe of diameter 4 cm.
- SRMJEEE - 2025
- Viscosity
- Markovnikov's rule is applicable to which of the following reactions?
- SRMJEEE - 2025
- Chemical Reactions
- The molar conductivities at infinite dilution for Na₂SO₄, K₂SO₄, KCl, HCl, and HCOONa at 300 K are 260, 308, 150, 426, and 105 S·cm²·mol⁻¹, respectively. What will be the molar conductivity at infinite dilution (Λ⁰) for formic acid in the same unit?
- SRMJEEE - 2025
- Mole concept and Molar Masses
View More Questions