Given:
The radii of curvature, R1=R2=20 cm
Object distance, u=30 cm (the object is placed on the left side, so u is negative)
Height ho = 2 cm
Let us consider the light incident from the air on a glass lens, so
μ = \(\frac{3}{2}\). Also, for a biconvex lens, R1 is positive and R2 is negative.
Therefore, in the case of the biconvex lens,
\(\frac{1}{f}\) = (μ−1)(\(\frac{1}{R_1}-\frac{1}{R_2}\))
⇒\(\frac{1}{f}\) =(\(\frac{3}{2-1}\))[\(\frac{1}{20}-(\frac{-1}{20})\)]
⇒\(\frac{1}{f}\) = (\(3-\frac{2}{2}\))(\(\frac{1}{20}+\frac{1}{20}\))
⇒\(\frac{1}{f}\) = \(\frac{1}{2}\times(\frac{2}{20})\)
∴\(\frac{1}{f}\) =\(\frac{1}{20}\)
So,
f = 20cm.
Now, calculate image distance by substituting the values of focal length and object distance in the thin lens formula:
\(\frac{1}{f}\) =\(\frac{1}{v}\)−\(\frac{1}{u}\)
Applying the values f = 20 and u=30 we get,
V = 60
⇒ So, the image distance is 60 cm from the lens and the image is formed on its right side. This is the reason why the image looks real in nature.
Now, We can measure the magnification of the object by the lens,
m=−\(\frac{H_i}{h_o}\) = −\(\frac{v}{u}\)
\(h_i\) = \(\frac{v}{u}\times h_o\)
⇒ \(h_i\) = \(\frac{60}{-30}\)×2
∴ \(h_i\)=−4 cm
The negative sign of the image’s height signifies that the image is inverted.
Therefore, option C is the correct answer.
In general, we have to assume
μ=1.5
So, f=20cm
\(\frac{1}{f}\) = \(\frac{1}{v}+\frac{1}{u}\) ⇒ \(\frac{1}{20}\) = \(\frac{1}{v}+\frac{1}{30}\)
\(\frac{1}{v}\)= \(\frac{1}{20}-\frac{1}{30}\)=\(\frac{10}{600}\)
V =60cm
\(\frac{h_i}{h_0}\) = 2
hi = 2×|h0| ⇒ hi = 4cm
Here, the image is real, inverted, magnified field and the height of the image is
4cm.
So, the correct option will be (C).
The current passing through the battery in the given circuit, is:
A bob of heavy mass \(m\) is suspended by a light string of length \(l\). The bob is given a horizontal velocity \(v_0\) as shown in figure. If the string gets slack at some point P making an angle \( \theta \) from the horizontal, the ratio of the speed \(v\) of the bob at point P to its initial speed \(v_0\) is :
A full wave rectifier circuit with diodes (\(D_1\)) and (\(D_2\)) is shown in the figure. If input supply voltage \(V_{in} = 220 \sin(100 \pi t)\) volt, then at \(t = 15\) msec:
Optics, deals with the determination of behaviour and the properties of light, along with its interactions with the matter and also with the instruments that are used to detect it.
Ray optics is also known as the geometrical optics and it is a branch of science which describes light propagation.
Reflection is the change in direction of light at an interface in-between two different media so that the wave-front returns into a medium from which it was originated.
Speed of light is the rate at which the light travels in free space.
A phenomenal change in image formed when the light is passed from one medium to another which is called Refraction.
Total Internal Reflection is the reflection of light when the light ray enters into a rarer medium from a denser medium and the angle of incidence is higher than the critical angle of incidence then that light ray will be reflected back to the denser medium.
Read More: Ray Optics and Optical Instruments